Carlo Gavazzi, M12 x 1, PNP-NO Inductive Sensor 78.5mm Length, 10 → 40 V dc, 12 → 36 V dc supply voltage

  • RS Stock No. 859-2976
  • Mfr. Part No. EI1204PPOSL-1
  • Manufacturer Carlo Gavazzi
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): LT
Product Details

Type EI, Stainless Steel Housing, DC

These EI type inductive proximity sensors are supplied in a standard stainless steel housing and are available in either long or short versions. They are also available in either M12 or M30 sizes

Features:
Stainless steel housing, cylindrical
Diameter: M12, M18, M30
Short or long versions
Sensing distance: 2 to 15 mm
Power supply: 10 to 40 V dc
Output: Transistor NPN/PNP, normally open or normally closed
Protection: Short-circuit and reverse polarity
LED-indication for output ON
2 m cable or plug M12

Standards

EN 50 008

Carlo Gavazzi Inductive Proximity Sensors

Specifications
Attribute Value
Thread Size M12 x 1
Body Style Barrel
Output Type PNP-NO
Detection Range 4 mm
Terminal Type M12 - 4 Pin
Supply Voltage 10 → 40 V dc, 12 → 36 V dc
Length 78.5mm
Maximum DC Voltage 40V
Mounting Type Non Flush
Switching Current ≤200 mA
IP Rating IP67
Housing Material Stainless Steel
Short Circuit Overload Protection Yes
Reverse Polarity Protection Yes
Maximum Switching Frequency 500Hz
Maximum Operating Temperature +70°C
Shielding Partial
Minimum Operating Temperature -25°C
4 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR390.87
MYR 386.81
units
Per unit
1 +
MYR386.81
Related Products
3-wire flush mounting, stainless steel bodied sensors, protected ...
Description:
3-wire flush mounting, stainless steel bodied sensors, protected to IP67 with an operating temperature range of –25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status. Inductive detectors for flush-mounting.PNP ...
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally ...
Description:
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via 2 metre PUR cable or via M8 screwed connector, axial output.
M12 standard inductive detectors, flush mountable."Normally open" PNP ...
Description:
M12 standard inductive detectors, flush mountable."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via 2 metre PVC cable or via M12 screwed connector, axial output.
This range of M12 cylindrical inductive proximity sensors ...
Description:
This range of M12 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Pre cabled or connectorFlush shielded or non-flush unshielded3 & 4 ...