AH180N-WSG-7 DiodesZetex,, Omnipolar Hall Effect Sensor Switch, 2.5 → 5.5 V, 3-Pin TSOT-23

  • RS Stock No. 823-2508
  • Mfr. Part No. AH180N-WSG-7
  • Manufacturer DiodesZetex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hall Effect Switches & Latches, Diodes Inc

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 10 Gs
Maximum Magnetic Sensor Operating Point 50 Gs
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 5.5 V
Length 3mm
Width 1.7mm
Height 0.775mm
Dimensions 3 x 1.7 x 0.775mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type TSOT-23
Typical Magnetic Sensor Hysteresis 10 Gs
Discontinued product
Related Products
Integrated circuits utilising the Hall Effect to implement ...
Description:
Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
Current sensing package with flip-chip technology3000 Vrms galvanic ...
Description:
Current sensing package with flip-chip technology3000 Vrms galvanic isolationHigh accuracy over temperatureTypical output error of 1%.
Integrated circuits utilising the Hall Effect to implement ...
Description:
Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.