Amber Glue Stick

  • RS Stock No. 896-2274
  • Mfr. Part No. 7718-12-250-ARP-TP10-RS
  • Manufacturer Power Adhesives
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Techbond 7718 Hot Melt Glue

This synthetic polymer-based hot melt glue has a low viscosity that sets very hard, making it ideal for potting, encapsulation and wood or knot repair.
Tested for use in electrical and electronic applications, Techbond 7718 complies with the UL-V0 flammability rating. Use of hot melt glue helps to speed up assembly with no mixing required. In addition, there is less wastage as unused adhesive is retained in the glue gun ready for the next use.

Applications

Potting
Encapsulation
Wood repair
Knot filling

Specifications
Attribute Value
Colour Amber
Diameter 12mm
Physical Form Stick
Chemical Composition Polyamide
Length 250mm
Special Features Low Viscosity, Short Open Time
52 In Global stock for delivery within 4 - 6 working days
Price 1 Lot of 10
MYR 74.48
Lot(s)
Per Lot
Per unit*
1 - 5
MYR74.48
MYR7.448
6 - 11
MYR73.48
MYR7.348
12 +
MYR72.91
MYR7.291
*price indicative
Related Products
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
White, high viscosity adhesive specially formulated for cable ...
Description:
White, high viscosity adhesive specially formulated for cable attachment in the telephone, computer and alarm installation industries. High molten tackInstant grab12mm sticks, 200mm longSuitable for use with all Power Adhesive 'Hotmelt' and gas powered glue guns.
A clear low melt adhesive suitable for bonding ...
Description:
A clear low melt adhesive suitable for bonding a wide range of substrates, without the fear of heat damage on heat sensitive surfaces. The adhesive has a working time of 35 seconds from applicationThe adhesive is supplied in a bag ...
The overtec system (also known as Over-Moulding) is ...
Description:
The overtec system (also known as Over-Moulding) is a low-pressure moulding process that uses thermoplastic moulding resin to achieve high quality sealing and protection of components, faster than 2 component potting resins and far lower capital cost than injection moulding. ...