Hammond 1591 Series Black ABS Enclosure, IP54, Black Lid, 150 x 80 x 46mm

Keep your PCBs safely under wraps with this enclosure from Hammond. It has integral card guides so you can securely store multiple 1.5mm-thick PCBs vertically. The hardwearing ABS material stands up to the demands of heavy-duty settings. Thanks to the unit's IP54 rating, you can be sure it's protected from dust so its contents stay contaminant-free. Four 10mm Phillips screws are included to keep the lid secured fixed on tightly.

• Self-tapping screws make installation a snap
• ABS body is flame-resistant to cut the risk of fire damage to sensitive equipment
• Lap-joint construction means the lid fits without gapping to keep PCBs protected from splashes of water

• Printworks
• Manufacturing facilities
• Robotics systems

You can store PCBs between 1.5 and 1.7mm thick at their edges. The boards must also fit in the guide height of 41.1mm and the inside width of 73.61mm. To store larger PC cards, you'll need a horizontal adaptor (570-708).

Yes, you can use a compatible clear lid (256-3372) instead of the standard one. This means you can check in on your PCBs without having to unscrew the cover.