Infineon, Gate Driver, 35 A 25-Pin 16 V, IQFN
- RS Stock No.:
- 258-4044P
- Mfr. Part No.:
- TDA21535AUMA1
- Manufacturer:
- Infineon
This image is representative of the product range
Bulk discount available
Subtotal 10 units (supplied on a continuous strip)*
MYR130.10
FREE delivery for orders over RM 500.00
In Stock
- 4,775 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 10 - 99 | MYR13.01 |
| 100 - 249 | MYR12.30 |
| 250 - 499 | MYR10.66 |
| 500 + | MYR10.10 |
*price indicative
- RS Stock No.:
- 258-4044P
- Mfr. Part No.:
- TDA21535AUMA1
- Manufacturer:
- Infineon
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Infineon | |
| Product Type | Gate Driver | |
| Output Current | 35A | |
| Pin Count | 25 | |
| Package Type | IQFN | |
| Driver Type | Gate Driver | |
| Minimum Supply Voltage | 4.25V | |
| Maximum Supply Voltage | 16V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 0.9mm | |
| Standards/Approvals | No | |
| Length | 4mm | |
| Width | 5 mm | |
| Series | TDA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Infineon | ||
Product Type Gate Driver | ||
Output Current 35A | ||
Pin Count 25 | ||
Package Type IQFN | ||
Driver Type Gate Driver | ||
Minimum Supply Voltage 4.25V | ||
Maximum Supply Voltage 16V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 0.9mm | ||
Standards/Approvals No | ||
Length 4mm | ||
Width 5 mm | ||
Series TDA | ||
Automotive Standard No | ||
The Infineon OptiMOS power stage is integrated power-stage contains a low quiescent current synchronous buck gate-driver IC which is co-packed with control and synchronous MOSFETs along with an active diode structure that achieves low Vsd similar to a Schottky with very little reverse recovery charge. The package is optimized for PCB layout, heat transfer, driver/MOSFET control timing, and minimal switch node ringing when layout guidelines are followed. The paired gate driver and MOSFET combination enables higher efficiency at lower output voltages. The internal MOSFET sensing achieves superior current sense accuracy vs. best-in-class controller-based Inductor DCR sense methods.
On-chip MOSFET current sensing and reporting with 5 μA/A gain
Over temperature protection and thermal shutdown
Cycle-by-cycle over current protection and flag
High-side MOSFET short detection and flag
Auto-replenishment on bootstrap capacitor
Compatible with 3.3 V tristate PWM Input