RS PRO Piston Inline Flow Switch, 0.1 L/min → 0.6 L/min,

  • RS Stock No. 510-0565
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass

Note

If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.

Specifications
Attribute Value
Media Monitored Liquid
Device Type Piston Inline
Minimum Flow Rate 0.1 L/min
Maximum Flow Rate 0.6 L/min
Supply Voltage 200 V ac
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 300bar
Material Brass
Maximum Media Temperature +100°C
Maximum Operating Temperature +120°C
Current Rating 1 A
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,099.56
units
Per unit
1 +
MYR1,099.56
Related Products
These SSF67 series floats from Cynergy 3 have ...
Description:
These SSF67 series floats from Cynergy 3 have been designed to provide different switching options with a longer reach float. The float is made with stainless steel 316L making it suitable to use with aggressive liquids and in applications where ...
Two flow transducers manufactured in acetal copolymer with ...
Description:
Two flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15mm diameter pipe connections. Provides a pulsed output proportional to flow rateLED and photodetector are separated by a turbine mounted on sapphire bearingsLED requires ...
AWM5000 series microbridge mass airflow sensors feature a ...
Description:
AWM5000 series microbridge mass airflow sensors feature a venturi type flow housing. They measure flow as high as 20 SLPM while inducing a maximum pressure drop of 2.25N H2O. The microbridge chip is in direct contact with the flow stream, ...
The AWM2000 Series microbridge mass airflow sensor is ...
Description:
The AWM2000 Series microbridge mass airflow sensor is a passive device comprised of two Wheatstone bridges. The heater control circuit is required for operation per specifications. The sensing bridge supply circuit is also required for operation per specifications. The differential ...