RS PRO Radial Flow Turbine Flow Meter, 0.25 L/min → 6.5 L/min,

  • RS Stock No. 257-149
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Liquid Flow Sensors

Two flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15mm diameter pipe connections.

Provides a pulsed output proportional to flow rate
LED and photodetector are separated by a turbine mounted on sapphire bearings
LED requires an external current limiting resistor (dependent on supply voltage)
Suitable for use with mains and heating system waters etc.
Rise/fall times 60/6ns
Output voltage 200mV (low); VCC (high)
Diode: Forward current 10mA, Power dissipation 100mW

Note

Not suitable for use with strong mineral acids/solutions, strong or searching solvents.

//media.rs-online.com/t_line/LI257133-01.gif
//media.rs-online.com/t_line/LI341480-10.gif
Specifications
Attribute Value
Media Monitored Liquid
Device Type Radial Flow Turbine
Minimum Flow Rate 0.25 L/min
Maximum Flow Rate 6.5 L/min
Supply Voltage 4.5 → 16 V dc
Pipe Diameter Range 15 mm
Maximum Pressure 20bar
Material Acetal Copolymer
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Current Rating 10 mA
20 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 190.07
units
Per unit
1 - 5
MYR190.07
6 - 11
MYR184.70
12 +
MYR182.67
Related Products
The Microchip MCP39F521 is an Energy Metering IC ...
Description:
The Microchip MCP39F521 is an Energy Metering IC designed for real-time measurement of input power in single-phase applications. The integrated design offers power monitoring accuracy of 0.1% error and less across a 4000:1 dynamic range. Active, Reactive and Apparent PowerTrue ...
AWM5000 series microbridge mass airflow sensors feature a ...
Description:
AWM5000 series microbridge mass airflow sensors feature a venturi type flow housing. They measure flow as high as 20 SLPM while inducing a maximum pressure drop of 2.25N H2O. The microbridge chip is in direct contact with the flow stream, ...
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...
Works according to the variable area principle and ...
Description:
Works according to the variable area principle and permits an accurate measurement of liquid media. Any orientationRugged metal designNatural glassG 1//4 BSP thread16 bar operating pressure120°C maximum operating temperatureGenerally used as an indication that something is not working and can ...