Recently searched

    Extender Boards & Adapter Boards

    Extender boards and adapter boards are electronic circuit boards used to bring a circuit card out of an enclosure or card cage so it can be tested or debugged and there are no restrictions from view or probing.Surface Mount (SMT) are either mounted directly on to the surface of a printed circuit board (PCB) or have legs that go through holes drilled in the PCB, a surface mount to through hole adapter board allows you to use one kind of component on the other kind of board.

    What is the difference between Extender Boards & Adapter?

    Now you have a basic idea of what the extender boards and adapter boards are all about. Before you purchase a power adapter board, it is worth to be aware of the difference that exist in between extender boards and adapter boards.Extender boards function by extending motherboard signals for testing or troubleshooting. The majority of them provide access to the bus signals bundles of wire held together through designated probe points, although a few also used multi-layer technology to manage cross talk and signal distortions.A surface mount into a hole adapter board will provide you the opportunity to use the component on any other type of board as well. However, it is not something that you can experience with surface mount boards. If you can understand this difference, you can easily end up getting hold of the right products that can cater to your specific needs effectively.The majority of designs in Extender Boards & Adapters are prototyped using SMT to go through hole adapter boards before being mass programmed or assembled. They make it easier to test and modify a circuit as well as device, enabling you to quickly troubleshoot and correct any problems with your prototype. Surface mount (SMT) to through hole board types Depending on your demands, SMT to through hole adapter boards are available in a variety of sizes and may be double or single sided. To enable the separation of certain modules from the board as a whole, some contain pre-scored break lines.

    What is a surface mount board?

    Electronic devices with components attached or positioned on the surface of both the PCB are known as surface-mount devices, or SMDs. The process used to create an SMD is known as surface-mount technology, or SMT. The through-hole technology building approach, in which components with wire leads are inserted into circuit board holes, has been substantially supplanted in the industry.For components that are not suitable for surface mounting, including massive transformers as well as heat-sinked power semiconductors, both approaches may be employed on the same board.Because SMT components in Extender Boards & Adapter can have smaller leads or even no leads at all, they are often smaller than their through-hole counterparts. It could contain a variety of short pins or leads, flat contacts, a grid of solder balls (BGAs), and terminations on the product's body.Get your extender and adapter boards from our storeYou can easily get high quality Extender Boards & Adapter boards from us. Bltouch is quite popular as a brand that offers such adapter boards. We can help you with getting a fully functional Bltouch adapter board. On the other hand, people who wish to buy an Ender 3 V2 adapter board, SMD adapter board, or PCIE extender board may also focus on the collection of products that we have for sale.A great thing about exploring our store for extender boards & adapters is that we have got something for everyone. You just need to browse through the Extender Boards & Adapter, and we make sure that you will not end up with any regrets at the end of the day. The right Extender Boards & Adapter can cater to your specific needs and help you with getting the job done.

    98 Products showing for Extender Boards & Adapter Boards

    RS PRO
    Extender board
    DIN 41612
    64, 96
    Epoxy Glass Fabric Laminate
    2
    281.6 x 100 x 1.6mm
    35µm
    FR4
    281.6mm
    1.6mm
    100mm
    -
    Each
    MYR2,761.46
    RS PRO
    Extender board
    DIN 41612
    96
    Epoxy Glass Fabric Laminate
    2
    281.6 x 233.4 x 1.6mm
    35µm
    FR4
    281.6mm
    1.6mm
    233.4mm
    -
    Each
    MYR1,374.75
    RS PRO
    Extender board
    DIN 41612
    96
    Epoxy Glass Fabric Laminate
    2
    281.6 x 100 x 1.6mm
    35µm
    FR4
    281.6mm
    1.6mm
    100mm
    -
    Each
    MYR67.50
    Sunhayato
    Conversion Board
    -
    -
    Epoxy Glass Fabric Laminate
    2
    38.36 x 22.86 x 0.8mm
    -
    FR4
    38.36mm
    0.8mm
    22.86mm
    MSOP
    Each
    MYR53.58
    Sunhayato
    Converter Board
    -
    112
    Epoxy Glass Fabric Laminate
    2
    59.69 x 59.69 x 1mm
    -
    FR4
    59.69mm
    1mm
    59.69mm
    -
    • RS Stock No. 655-533
    • Mfr. Part No. 23021-603
    Each
    MYR1,614.17
    nVent-SCHROFF
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 655-579
    • Mfr. Part No. 23021-651
    Each
    MYR1,614.17
    nVent-SCHROFF
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 101-366
    • Mfr. Part No. MIKROE-303
    Each
    MYR33.11
    Brand-Rex
    Adapter Board
    DIP
    8
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 903-3848
    • Mfr. Part No. DIP-ADAPTER-EVM
    Each
    MYR91.05
    Texas Instruments
    DIP adapter evaluation module
    -
    -
    -
    1
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 101-363
    • Mfr. Part No. MIKROE-308
    Each
    MYR33.11
    Brand-Rex
    Adapter Board
    -
    24
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 260-9025
    • Mfr. Part No. 23021-653
    Each
    MYR1,918.99
    nVent SCHROFF
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 101-365
    • Mfr. Part No. MIKROE-310
    Each
    MYR32.27
    Brand-Rex
    Adpater Board
    -
    28
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Each
    MYR351.30
    nVent SCHROFF
    Intermediate Adapter, Intermediate Adapter
    DIN 41612
    -
    Epoxy Glass Fabric Laminate
    2
    290 x 160 x 1.6mm
    -
    FR4
    6U
    1.6mm
    160mm
    -
    • RS Stock No. 101-362
    • Mfr. Part No. MIKROE-305
    Each
    MYR33.11
    Brand-Rex
    Adapter Board
    -
    16
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 260-9019
    • Mfr. Part No. 23021-610
    Each
    MYR2,307.56
    nVent SCHROFF
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 107-005
    • Mfr. Part No. MIKROE-155
    Each
    MYR46.66
    Brand-Rex
    Adapter Board
    4 Wire SPI
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 101-345
    • Mfr. Part No. MIKROE-197
    Each
    MYR32.77
    Brand-Rex
    Adapter
    IDC10
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 106-950
    • Mfr. Part No. MIKROE-260
    Each
    MYR40.02
    Brand-Rex
    EasyTEST Board
    IDC10
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 655-578
    • Mfr. Part No. 23021-616
    Each
    MYR4,769.66
    nVent-SCHROFF
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 106-949
    • Mfr. Part No. MIKROE-193
    Each
    MYR40.02
    Brand-Rex
    EasyPROTO Board
    IDC10
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Results per page