Rittal Mounting Plate for use with 1501.510, 1515.510, 1522.010, 1530.510

  • RS Stock No. 457-1130
  • Mfr. Part No. 1561700
  • Manufacturer Rittal
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Terminal Boxes, KL Series

The KL series terminal boxes are made from sheet steel and painted in a light grey RAL 7035 finish. The folded protective front edge of the terminal box reinforces stability and prevents the ingress of dirt or water when opened. Mounting lugs within the terminal box allow it to be fitted with either terminal rails or a chassis plate depending on requirements. The KL series is available with or without a gland plate.

Folded protective front edge reinforces stability and prevents the ingress of dirt or water when opened
Mounting lugs for easy installation of DIN rail or chassis plate
1.25mm sheet steel enclosure
Painted light grey RAL 7035 finish
Cover with all round foam PU seal

Note

Terminal boxes 499-6163, 499-6179, 499-6191, 499-6208, 769-5043 and 769-5046 are supplied with a gland plate.
DIN rail and chassis plate available separately.

Standards

IP66 to EN 60 529/10.91 complies with NEMA 4.

Approvals

UL, CSA, TUV, VDE.

Supplied with

Enclosure, cover with all round foam PU seal, cover screws including plastic bushes (enclosure with gland plate is also supplied with seals and assembly parts).

Rittal Mounting Plate

Mounting plate for junction box installation for outside the enclosure. This mounting plate is for use with Rittal KL series terminal boxes.

Dimensions (LxWxH) – 125 x 285 x 2mm

Specifications
Attribute Value
Type Mounting Plate
Material Steel
Dimensions 125 x 285 x 2mm
Length 125mm
Width 285mm
Height 2mm
For Use With 1501.510, 1515.510, 1522.010, 1530.510
9 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 39.09
units
Per unit
1 - 14
MYR39.09
15 - 49
MYR37.42
50 - 99
MYR35.73
100 +
MYR34.10
Related Products
A freely combinable base/plinth system for virtually any ...
Description:
A freely combinable base/plinth system for virtually any application. The trim panels and corner pieces may be combined in variable heights. • Trim panels made from sheet steel• Corner pieces made from fibreglass-reinforced plastic, cover caps are ABS• Jet black, ...
A series of elegant table and wall housings ...
Description:
A series of elegant table and wall housings made of impact-resistant polystyrene. They are used for the installation of small appliances, and many other components. The housings are made up of two half shells; the upper part is light grey ...
All UGA universal adapters can be used in ...
Description:
All UGA universal adapters can be used in combination with all UH universal fittings and can be interlocked with each other by the use of a 4-claw locking device which can be snapped onto and removed as required. For fitting ...
All UH universal fittings can be used in ...
Description:
All UH universal fittings can be used in combination with all UGA universal adapters and can be interlocked with each other by the use of a 4-claw locking device which can be snapped onto and removed as required.