Phoenix Contact QUINT-PS/1AC/12DC/20 Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 12V dc dc
- RS Stock No.:
- 665-7832
- Mfr. Part No.:
- 2866721
- Manufacturer:
- Phoenix Contact
4 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
8 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR3,586.94
Units | Per Unit |
1 + | MYR3,586.94 |
- RS Stock No.:
- 665-7832
- Mfr. Part No.:
- 2866721
- Manufacturer:
- Phoenix Contact
Legislation and Compliance
- COO (Country of Origin):
- TH
Product Details
Phoenix Contact DIN Rail Power Supply, Single-Phase Input, 90% Efficiency - QUINT-PS/1AC/12DC/20 - 2866721
Step your mains supply's large voltages down with this Phoenix Contact DIN rail power supply. As it switches voltages to a steady 12V DC output, it adapts the electrical supply to deliver the power your system needs. With operating times of under 1s, the device reacts quickly to give you reliably responsive switching. By converting 90% of loads, it minimises energy waste to provide efficient power without excess heat.
Keen to drive out power fault disruption in an automated production process or surveillance system? This item's selective fuse-breaking function trips only a faulty circuit, so other lines run smoothly. Impacts are no match for the robust zinc-plated sheet steel body, which cuts the risk of hardware damage.
Mounting the module is a tool-free job, thanks to its snap-on rail installation. Because it holds ripple voltages below 50mV, it reduces electrical noise to keep power connections reliable. Built-in LEDs indicate the input status, meaning you can fly through setup inspections.
Keen to drive out power fault disruption in an automated production process or surveillance system? This item's selective fuse-breaking function trips only a faulty circuit, so other lines run smoothly. Impacts are no match for the robust zinc-plated sheet steel body, which cuts the risk of hardware damage.
Mounting the module is a tool-free job, thanks to its snap-on rail installation. Because it holds ripple voltages below 50mV, it reduces electrical noise to keep power connections reliable. Built-in LEDs indicate the input status, meaning you can fly through setup inspections.
Features & Benefits
• Tested to IEC 61010-1 standards to work in measurement and control systems
• Handles surge voltages up to 4kV, cutting risk of damage from electrical faults
• Performs without a hiccup at temperatures between -25°C and +70°C
• Handles surge voltages up to 4kV, cutting risk of damage from electrical faults
• Performs without a hiccup at temperatures between -25°C and +70°C
Specifications
Attribute | Value |
---|---|
Type | Switched Mode |
Output Voltage | 12V dc |
Output Current | 20A |
AC or DC Input Voltage | ac |
AC or DC Output Voltage | dc |
Input Voltage | 85 → 264V ac |
Power Rating | 240W |
Electrical Phase | 1 |
Number of Outputs | 1 |
Height | 130mm |
Width | 90mm |
Depth | 130mm |
Series | QUINT-PS/1AC/12DC/20 |
Standards Met | CE |
Maximum Temperature | +70°C |
Special Features | Overvoltage and Short Circuit Protection |
Load Regulation | ±1% |
MTBF | 500000h |
Mounting Type | DIN Rail Mount |
Minimum Temperature | -25°C |
Efficiency | >90% |
Ripple And Noise | 50mV Pk-Pk |