Phoenix Contact STEP POWER Switched Mode DIN Rail Power Supply 264V ac AC Input 56V dc, 2 A Output DC 96 W

RS Stock No.:: 665-7804
Distrelec Article No.:: 303-09-494
Mfr. Part No.:: 2868680
Manufacturer:: Phoenix Contact

Phoenix Contact STEP POWER Switched Mode DIN Rail Power Supply 264V ac AC Input 56V dc, 2 A Output DC 96 W

Subtotal (1 unit)*

MYR636.24

FREE delivery for orders over RM 150.00

Stocked by manufacturer

Ready to ship from 16 September 2026

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per Unit
1 +	MYR636.24

*price indicative

RS Stock No.:: 665-7804
Distrelec Article No.:: 303-09-494
Mfr. Part No.:: 2868680
Manufacturer:: Phoenix Contact

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Phoenix Contact
	Series	STEP POWER
	Product Type	DIN Rail Power Supply
	Sub Type	Switched Mode
	Maximum Output Voltage	56V dc
	Electrical Phase	1
	Input Voltage Type	AC
	Number of Outputs	2
	Power	96W
	Output Current	2A
	IP Rating	IP20
	Minimum Operating Temperature	-25°C
	Output Voltage Type	DC
	Maximum Operating Temperature	70°C
	Standards/Approvals	No
	Hazardous Area Certification	No
	Width	61mm
	Height	90mm
	Depth	90mm
	Maximum Input Voltage	264V ac
	Minimum Input Voltage	85V ac
	Efficiency	90%

	Select all
	Brand Phoenix Contact
	Series STEP POWER
	Product Type DIN Rail Power Supply
	Sub Type Switched Mode
	Maximum Output Voltage 56V dc
	Electrical Phase 1
	Input Voltage Type AC
	Number of Outputs 2
	Power 96W
	Output Current 2A
	IP Rating IP20
	Minimum Operating Temperature -25°C
	Output Voltage Type DC
	Maximum Operating Temperature 70°C
	Standards/Approvals No
	Hazardous Area Certification No
	Width 61mm
	Height 90mm
	Depth 90mm
	Maximum Input Voltage 264V ac
	Minimum Input Voltage 85V ac
	Efficiency 90%

Datasheet 2868680

COO (Country of Origin):: VN

Phoenix Contact STEP POWER Single Phase Power Supplies (PSU)

The single-phase STEP POWER generation of compact power supply units from Phoenix Contact have a high degree of efficiency and the low standby losses make for high power efficiency. The PSU’s are available with 24 V DC output voltage in various performance classes and overall widths as well as special voltages 5, 12, 15, and 48 V DC.

These PSU's (Power supply units) have been designed more specifically for building automation, however, are not limited to explicitly that use. Low idling and maximum efficiency help to achieve higher energy efficiency. Not to mention, these power supplies have a DIN rail notch took out of the housing to allow you effortless install, on a DIN rail. DIN Rail power supply's are great for cable management, having everything in a single cabinet for consistent maintenance and ease of use.

Features and benefits:

• Easy mounting by snapping on the DIN rail or screwing onto a level surface

• Maximum energy efficiency through small losses

• Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve

• Fast commissioning with LED function monitoring

• High operational safety by long power failure under full load

• Worldwide use by wide-range intake and international approval package

• Wide temperature range from -25 ° C to +70 ° C

• Parallel switched to increase performance and redundancy

• Outdoor installation possible

• Energy savings thanks to maximum energy efficiency and incredibly low idling losses

Typical applications:

The design of the PSUs makes them suitable for installation distributors and flat control panels. More specifically, these STEP POWER PSU's have been designed to cater for building automation applications.

How to install a DIN Rail Power Supply?

DIN rail power supplies typically feature an easy install. With the ability to mount it onto a compatible DIN rail, all you usually have to do is slide it onto one. These STEP DIN rail power supply's support NS 35 (EN 60715) rails. Once you've slid your power supply onto your rail, it is then a case of connecting your cables into the relevant inputs and outputs. Wires must be stripped 6.5mm before inserting into the terminal blocks. The terminal blocks are an effortless screw connection, making your install simple.

What is a DIN rail power supply?

Effectively, a DIN rail power supply is a power supply, that is designed to be put on a DIN rail. These power supplies cater to the industrial world, rather than consumer electronics. They feature different connection methods such as terminal block connections rather than your typical 3-pin socket power. DIN Rail PSU's are designed to sit inside cabinets and work hand-in-hand with providing higher efficiency for industrial applications.

Approvals

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved