Development Kit Clock Generator for use with DS1087L Spread-Spectrum EconOscillator

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Clock Gen 2 click is an accurate square wave generator that can generate a clock signal in the range from 260kHz to 66.6MHz. It generates a square wave in the frequency of 66.6MHz, which is then processed by the prescaler, which can be set in the range from 20 up to 28. This allows the full frequency range to be achieved on the output. The DS1087L, a 3.3V spread-spectrum EconOscillator, used on the Clock Gen 2 click, offers the spread-spectrum function, which can be controlled via the IC pin and register setting. This allows reduced EMI, especially on the high frequencies. Finally, the DS1087L offers a NV memory (EEPROM), which is used for storing the values of the configuration registers.

Factory Programmed Square-Wave Generator from 130kHz to 66.6MHz
No External Timing Components Required
EMI Reduction
2.7V to 3.6V Supply
User Programmable Down to 130kHz with Divider (Dependent on Master Oscillator Frequency)
2% or 4% Selectable Dithered Output
Glitchless Output-Enable Control
2-Wire Serial Interface
Nonvolatile Settings
Power-Down Mode
Programmable Output Power-Down/Disable Mode
Printers
Copiers
PCs
Computer Peripherals
Cell Phones
Cable Modems

Specifications
Attribute Value
Accessory Type Clock Generator
For Use With DS1087L Spread-Spectrum EconOscillator
9 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 82.20
units
Per unit
1 +
MYR82.20
Related Products
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)3,650 slices containing four 6-input ...
Description:
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)3,650 slices containing four 6-input LUTs and 8 flip-flops1,620 Kbits of fast block RAMThree clock management tile, each with a phase-locked loop and mixed-mode clock manager80 DSP slicesInternal clock speeds exceeding 450 MHzOn-chip analogue-to-digital converter ...
Compatible Design Upgrade 3D Printers Printers, POS Office ...
Description:
Compatible Design Upgrade 3D Printers Printers, POS Office and home automation Textile, Sewing Machines CCTV, Security ATM, Cash recycler HVAC2-phase stepper motors up to 2A coil current (peak) STEP/DIR Interface with 2, 4, 8, 16 or 32 microstep pin setting ...
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 ...
Description:
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 kHz, 800 kHz and 1.2 MHzAdjustable Current Limit Settings with Hiccup Restart0.6 V ±1% Reference Voltage Across Full Temperature RangeOptional External 5-V Bias Support for Enhanced EfficiencyD-CAP3™ Control Mode for Fast Transient ...
Compact 6-channel spectrometry solutionSimple text-based command interface via ...
Description:
Compact 6-channel spectrometry solutionSimple text-based command interface via UART, or direct register read and write with interrupt on sensor ready option on I²CLifetime-calibrated sensing with minimal drift over time or temperatureNo additional signal conditioning requiredElectronic shutter ...