Digilent Pressure Sensor, Voltage Control, 3.125 → 5.5 V, 10 mA

  • RS Stock No. 134-6485
  • Mfr. Part No. 410-333
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pmod DPG1 Differential Pressure Gauge

The Pmod DPG1 is a differential pressure gauge module featuring an NXP MP3V5010DP piezoresistive transducer and a Texas Instruments ADCS7476 12-bit ADC.

• 0 to 10kPa differential pressure range
• Temperature compensated and calibrated
• Host communication: SPI bus
• Follows Digilent Pmod Interface Specification Type 2
• Dimensions: 25 x 20mm

Note

Should only be used to measure dry air pressure. Unsuitable for liquids.

Supplied with

610mm length of 2.5mm polyvinyl tube

Specifications
Attribute Value
Supply Voltage 3.125 → 5.5 V
Current Rating 10 mA
Voltage Rating 3.5 V
Control Input Voltage
Length 20mm
Width 25.4mm
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 174.62
units
Per unit
1 +
MYR174.62
Related Products
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne ...
Description:
Quadrature pulse countingMultiple dynamic settingsSolid state power stageOne or two pulse feedbackVoltage or mA controlPosition accuracy max. 0.2%Versatile setting optionsDigitally settable parametersHousing options available.
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed controlEmploys armature feedback technique to ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...