FlexLink Beam T-Slot Nut, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS Stock No. 248-9843
  • Mfr. Part No. XCAN 6
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

T-slot Nuts XC, XF and XD

Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.

Specifications
Attribute Value
Structural Element Type Beam
Connector Type T-Slot Nut
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Steel
Product System XC
165 In Global stock for delivery within 4 - 6 working days
Price 1 Bag of 10
MYR 80.56
Bag(s)
Per Bag
Per unit*
1 - 5
MYR80.56
MYR8.056
6 - 24
MYR78.56
MYR7.856
25 - 49
MYR77.01
MYR7.701
50 +
MYR75.65
MYR7.565
*price indicative
Related Products
Suitable for simple door functions, The T-slot rotatable ...
Description:
Suitable for simple door functions, The T-slot rotatable location lugs can be removed if the hinge is to be fixed to a flat surface. Hole centres 50mm,Fasteners not included. Each hinge requires:. Qty 2 M6´12 socket screws see stock no. ...
Multi-blocks are a versatile connector for fastening sheet ...
Description:
Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting ...
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle.,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
The FlexLink Rotary Joint XC allows two XC ...
Description:
The FlexLink Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing. The joint is intended for use in pairs, to avoid movement loads. The joint should be fastened ...