LPRS eR-EVK-01, eRIC4/9/LoRa Evaluation Kit eRIC & eRA GPS Evaluation Kit for LPRS Radio Modules

  • RS Stock No. 171-3744
  • Mfr. Part No. eR-EVK-01
  • Manufacturer LPRS
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The board can be powered either by the host, via the USB connection or by the built in three cell (4.5V) switched battery supply mounted on the reverse side of the board. The u-blox GNSS receiver module serial data can be directly accessed using the second micro USB connector labelled “GPS USB interface”. Messages from the receiver can be viewed in any serial terminal software program. Alternatively the u blox U-Centre evaluation software can be used to exercise and fully explore the device. The on board Microchip™ PIC24HJ32GP302 is pre-programmed with a bootloader and application software which can be selected to perform different functions using the Mode Select switch.

Specifications
Attribute Value
RF Technology Wireless
Classification Evaluation Kit
Kit Classification Evaluation Kit
Technology Wireless
For Use With LPRS Radio Modules
Featured Device ERIC4/9/LoRa
Kit Name ERIC & eRA GPS Evaluation Kit
12 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR1,335.25
MYR 935.75
units
Per unit
1 - 4
MYR935.75
5 +
MYR929.03
Related Products
The Silicon Labs wireless Bluetooth starter kit is ...
Description:
The Silicon Labs wireless Bluetooth starter kit is a 2.4GHz frequency featured tool for easy evaluation and development of wireless applications. The on-board J-Link debugger enables programming and debugging on the target device over USB or Ethernet and also the ...
The NCN5150 is a single-chip integrated slave transceiver ...
Description:
The NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757-2 and EN 1434-3 describing the physical ...
The Secure AVR® BLE IoT Node incorporates an ...
Description:
The Secure AVR® BLE IoT Node incorporates an ATtiny1617 microcontroller, a fully-certified RN4871 Bluetooth® 4.2 Low Energy module, an ATECC508A CryptoAuthentication device and a 3-axis accelerometer with temperature sensor to demonstrate a complete solution for a typical IoT end node. ...
Description:
The Wio LTE Cat M1 / NB1 is an exciting IoT focused addition to our Wio cellular series which will provide you a more convenient IoT design and prototyping experience. The board features a M4 processor, a ublox modem with ...