Molex SMA Series, Jack PCB Mount SMA Connector, 50Ω, Solder Termination, Right Angle Body

50 Ohm SMA RF coaxial PCB mount Jack Receptacles with a teflon dielectric, gold plated centre contact and brass body with Gold plating except 800-6918 and 800-6936 which have Nickel plated bodies.
These SMA RF coaxial PCB mount Jack Receptacles features are:
759-5293 PCB and Panel mount, supplied with a jam nut and lock washer.
759-5299 Edge mount, 1.6 mm thick PCB, length from PCB edge is 9.53 mm.
759-5252 Right Angle, Through Hole
800-6918 Right Angle, Through Hole Nickel plated
800-6961 Edge Mount, 1.6 mm thick PCB, length from PCB edge is 12.7 mm.
759-5303 Vertical, Through Hole
800-6933 Vertical, SMT
800-6949 Edge and Bulkhead mount (no hardware)
800-6936 Right Angle, PCB and Bulkhead mount, Nickel plated
841-1827 Right Angle, PCB mount, Through Hole
800-6986 Jack to Jack Bulkhead Adapter

From Molex, this SMA RF coaxial cable connector is right angled and PCD mounted. With a Teflon dielectric and gold plated centre contact, combined with a threaded coupling design, this high-performance coaxial cable connector ensures a sturdy and reliable connection.
This Molex SMA RF Coaxial jack has a brass body and gold plating, resulting in a high mechanical strength.

• Robust design
• Threaded connection
• Reduced attenuation

Version A Subminiature Connectors are often used with WiFi antenna systems, and are commonly found in network connections for both domestic and commercial environments.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Molex SMA RF Coaxial Connectors

The Molex range of high- performance SMA RF Coaxial subminiature Connectors are suitable for microwave frequencies. The SMA design of threaded couplings gives uniform contact of the outer conductors to reduce reflections and attenuation at higher frequencies. High mechanical strength and durability are also ensured by the threaded SMA design.