INA Sealed Cam Follower LR6002-2RS 15mm ID, 35 mm OD

Ball bearing track rollers: Are ready-to-fit, single or double row rolling bearings based on deep groove or angular contact ball bearings;Are supplied with or without a stud (designs without a stud are mounted on shafts or studs);Have particularly thick-walled outer rings with a crowned or cylindrical outside surface;Can support high radial loads;Tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts;Are sealed on both sides;Are also available with a plastic tyre on the outer ring for low-noise running;Are not mounted in a housing bore, but are supported on a flat mating track;Can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction