SKF Roller Yoke Cam Follower 305806 C-2Z 30mm ID, 72 mm OD

This cam follower is a yoke-style roller bearing designed to translate rotational motion into guided linear contact in mechanical systems. It is intended for use in industrial automation and electromechanical assemblies where controlled rolling contact and sealed operation are required. The component suits environments where mounted rollers must carry loads while maintaining protected internal elements.

• High dynamic capacity supporting heavy-duty cyclic loads
• Sealed configuration preventing ingress of contaminants
• Robust roller contact reduces friction in guided motion
• Substantial static resistance for intermittent Peak loads
• Narrow cross-section enabling Compact assemblies

• Suitable for linear guides in automated transfer systems
• Ideal for cam-driven indexing mechanisms in machinery
• Used with conveyor support rollers in assembly lines
• Can be used for follower elements in packaging equipment

The unit is supplied with a 30mm internal bore to suit standard shaft diameters and ensure secure press-fit installation.

The roller presents a 23.8mm width to spread contact stresses and improve wear life under point or line loading.

The rollers measure 72mm in diameter, which influences contact patch size and stiffness in loaded applications.

Use the specified 27 kN dynamic rating for continuous operational loading and a 1.7 kN static Value for maximum stationary loads during Peak conditions.

The component uses a yoke configuration to facilitate side-loaded or bracket-mounted installations where a Compact roller element is required.