EA Elektro-Automatik Digital Bench Power Supply 320W, 1 Output 0 → 84V 10A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

EA-PS 2000B Series

EA-PS 2000B series μ-processor controlled and USB-programmable low-cost power supplies provide for a fully flexible 'auto-ranging' output. Enabling them to work with either a higher voltage or a higher current within the stipulated U/I/P rating. They are equipped with digital encoders for U and I setting, a full 4-digit LCD segment display with various function status (output pre-set, -lock and standby). And a mini USB port for computer control. The units have high stability and low ripple and are protected against overcurrent (OCP), DC over-voltage (OVP) and over-temperature (OTP). Applications include R&D, repair, test, maintenance and vocational training in small laboratories, workshops, technical schools and universities.

Features and Benefits

Frequency 45 Hz to 65 Hz
Operating temperature 0 to 50°C
Attractive flat desk-top housing
Natural convection (no fan)
IEC 320-C14 input receptacle
Output via safety (banana) sockets

LIZENZCODE EASYPS2000B

The LIZENZCODE EASYPS2000B is a Software tool to control and monitor power supplies and electronic loads. This software tool is easy to handle with a minimum of setup required. The surface is completely in English. This tool is compatible to the use with PS2000B series power supplies.

Elektro-Automatik

Specifications
Attribute Value
Output Voltage 0 → 84V
Output Current 10A
Number of Outputs 1
Type Digital
Power Rating 320W
Supply Voltage 100 → 240V ac
Number of Displays 2
Input Connector IEC 320
Output Connector 4 mm Safety Socket
Minimum Temperature 0°C
Maximum Temperature +50°C
6 Within 4 working day(s) (Global stock)
27 Within 4 working day(s) (Global stock)
Price Each
MYR 1,612.25
units
Per unit
1 +
MYR1,612.25
Related Products
RS Pro IPS-H Series of single output linear ...
Description:
RS Pro IPS-H Series of single output linear DC power supplies includes overload and reversed polarity protection to protect DUTs from damage due to inappropriate operation. The internal select for dynamic loads is often used for amplifier testing. It can ...
Due to their high accuracy and fast load ...
Description:
Due to their high accuracy and fast load recovery time, the R&S®NGL200 power supply series is perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their ...
Very short adjustment periodIntegrated sequence function to generate ...
Description:
Very short adjustment periodIntegrated sequence function to generate voltage and current flowsAuto-ranging outputFront and rear output terminalsAddressable RS232 interface / analogue interfaceIEEE488 interface can be integrated as an optionMounting kit 1 for mounting a device in a 19" rackMounting kit ...
Separate 3 digit 14mm voltage and current metersConstant ...
Description:
Separate 3 digit 14mm voltage and current metersConstant voltage or constant current operationNew safety terminals accept fixed shroud 4mm plugs plus forks and wiresDC output switch enables voltage/current setup with load disconnectedLow ripple and noiseSupplied with mains lead and instructions. ...