SKF 6000-2RSH/C3GJN Single Row Deep Groove Ball Bearing- Both Sides Sealed 10mm I.D, 26mm O.D

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.

Features:

• Excellent performance in hot conditions, dry environments and low rotational speed applications
• Temperature range -30°C to 150°C
• Suitable for high and very high speeds
• Steel/Ceramic ball material
• Plain race type
• Low friction
• Available in many designs, variants and sizes

Why choose Deep Groove Ball Bearings?

• For their versatility - channelling radial and axial loads they are widely used in many industries
• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt
• Low maintenance - no additional lubrication after installation

Applications:

• Agricultural industry
• Food processing
• Machine Tools
• Material handling
• Medical/Pharmaceutical
• Printing
• Wind energy

What is the inner ring diameter?
A range between 6 mm to 40 mm

What is internal/external design?

• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides
• Z, 2Z - Shield on one or both sides
• 2RSL - RSL low-friction contact seal on both sides of the bearing
• 2RZ - RZ low-friction non-contact seal on both sides of the bearing
• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring
• NR - Snap ring groove in the outer ring, with an appropriate snap ring
• E - Reinforced ball set

Cage Design

• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred
• Stainless steel

Lubrication

• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease
• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C
• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C
• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade)

Accuracy/Clearance

• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal
• C4 - Radial internal clearance greater than C3
• C5 - Radial internal clearance greater than C4

This ball bearing is designed for diverse applications within the mechanical and electrical sectors. It features an inside diameter of 10mm and an outside diameter of 26mm, with a race width of 8mm. The single row deep groove design ensures efficient performance, while the sealing arrangement provides protection against contaminants, enhancing durability and lifespan.

• Single row deep groove design optimises operational efficiency
• Sealed on both sides to guard against contamination
• C3 bearing clearance accommodates thermal expansion
• Steel construction ensures strength and longevity
• High dynamic load rating of 4.75kN supports substantial loads

• Suitable for spinning machinery to promote smooth operation
• Ideal for electric motors and gearboxes
• Utilised in conveyor systems for consistent performance
• Appropriate for precision instruments to ensure accuracy

Yes, it supports a limiting speed of 19000r/min.

It accommodates a 10mm inside diameter and a 26mm outside diameter.

Yes, it has a dynamic load rating of 4.75kN.

Deep Groove Ball Bearings