SKF 6313/C3 Single Row Deep Groove Ball Bearing- Open Type 65mm I.D, 140mm O.D

This single-row, plain-race ball bearing from SKF can accommodate a limited axial load as well as a substantial radial load, acting in both directions. As a deep-groove unit, it's optimised for low noise and minimal friction, enabling higher rotational speeds and running at a lower temperature, which extends the life of the bearing. The open-end design makes relubricating it easy, and other than this it needs very little in the way of maintenance.

• Steel cage combines strength with corrosion resistance, so suited to damp industrial conditions
• Parallel bore to fit straight onto a shaft without the need for a bearing sleeve
• Dynamic load rating of 97.5 kN makes it suitable for rotating heavy loads

• Heavy-duty motors
• Pumps
• Automation controls

Open-end ball bearings are suitable for use in clean environments where you don't need to worry about dust and dirt contaminating the inside of the bearing. The open-end style allows the lubricant to travel freely. For dirty environments, a sealed or shielded ball bearing is a more suitable option.