ebm-papst 4400 Series Axial Fan, 24 V dc, DC Operation, 184m³/h, 4.1W, 119 x 119 x 38mm

From ebm-papst, a series of compact and durable DC Axial Fans, perfect for cooling purposes. Featuring a plug and plug build, this axial fan is fully assembled with M3 threaded inserts and a hard wired connector, which ensures it can be screwed immediately onto a motherboard and plugged straight in. All models are highly reliable and excellent quality.

• Corners have M3 threaded inserts
• IP20 Protection
• Connection lead is 313 mm (+/- 10 mm)
• Blowing over struts
• High-quality plastic housing

An axial fan is a type of fan commonly used within everyday applications, such as air conditioners and computers. It causes both air and gas (depending on the application) to flow directly through it in an axial direction. Allowing the air/gas flow to be axial at both entry and exit. The most common versions tend to have fewer blades than a conventional ducted fan which have similar operations.

We do have finger guards, please have a look at RS Stock Number – 826-1363 for a suitable finger guard.

The hard wired connector is a Molex 22-01-2025, which we also stock separately, see Stock Number - 296-4934.

There are many benefits of ball bearing fans as opposed to sleeve bearings. The general selection would be due to their long life. But also: -

• Vastly increased performance of the motor
• Better sealing shield
• Higher operating temperature