DIN Rail Mount Auxiliary Contact, 2NO, 6 A, 230 V ac

  • RS Stock No. 772-1230
  • Mfr. Part No. 5SW3302
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Series 5SM3 RCCBs

Residual Current operated circuit breaker for Personnel and fire protection
Free from FCKW and silicone
2 or 4 pole
Instant tripping, surge current withstand capability >1kA
Mains connection alternatively from above or underneath
Reciprocally sleeve terminals with wire protection
Lower combination clamp for the simultaneous connection of bus bars and leaders
Safe and rapid connection of the feeder cables due to relocation of busbar at the rear
N-Connection on the left allows easy busbar mounting with pin busbar if the miniature circuit breakers are fitted on the right.
DIN rail mounting (TH 35 according to DIN EN 60715)
Equipment life span: >10 000 Switching cycles
An auxiliary circuit switch can be fitted to the right hand side of the enclosure by the customer
Operating handle and test button can be locked by means of a hand locking device
Enclosure: IP20
Dimensions (HxD): 90x70mm
Dimensions (width): 2 pole 36mm; 4 Pole 72mm
Ambient temperature: -5→+45 °C

Standards

IEC/EN 61008

Specifications
Attribute Value
Number of Contacts 2
Range Sentron
Normal State Configuration 2NO
Mounting Style DIN Rail Mount
Contact Current Rating 6 A
Contact Voltage Rating 230 V ac
Series 5SW3
Discontinued product
Related Products
Professional range of MS32 series accessories. The accessories ...
Description:
Professional range of MS32 series accessories. The accessories include IP41 and 55 rated enclosures, emergency stop push-buttons, padlocks, shunts and under voltage release.
Professional range of M32 series connection blocks. The ...
Description:
Professional range of M32 series connection blocks. The blocks are designed to join a motor protection switch with a connector forming a single unit starter.
On / Off Switch for DIN rail assemblyTypes ...
Description:
On / Off Switch for DIN rail assemblyTypes with 32A to 63A applicable as load disconnecting switches after EN 60947-1With separate handle locking deviceSealable witch positionAuxiliary current switch can be mountedPosition indicator red / green on 5TE83, 4, & 5 ...
A range of 25A modular contactors from the ...
Description:
A range of 25A modular contactors from the 22 Series from Finder. NO contact gap ≥3 mm, double breakContinuous duty for the coil and contactsAC/DC silent coil (with varistor protection)Protective separation (reinforced insulation) between coil and contactsMechanical and LED indicators ...