Microchip ARD00354, Wheatstone Bridge Reference Design for MCP6N11, MCP6V26, MCP6V27

  • RS Stock No. 749-6451
  • Mfr. Part No. ARD00354
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP6N11 Instrumentation Amplifier Wheatstone Bridge Reference Design

This board demonstrates the performance of Microchips MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchips MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real world interference is added to the bridges output, to provide realistic performance comparisons. Data is gathered and displayed on a PC, for ease of use. The USB PICmicro® microcontroller and included Graphical User Interface (GUI) provides the means to configure the board and collect sample data.

Features and Benefits:

RTD temperature sensorINA signal conditioningPICmicro signal conditioning and communicationsPC software (GUI): Thermal Management Utility

Software:

Microchip provides a free software called 'Thermal Management Utility'. You can find a link for it below. Thermal Management Utility handles communications through the USB connected to your board and will display data on a strip chart. It can store single points of calibration ecoefficiency on the PIC MCU and tells the PIC MCU how to configure the average filter. http://ww1.microchip.com/downloads/en/DeviceDoc/ThermalManagementUtility-v1.5.8.zip

Whats in the box?

  • 1x ARD00354 Board
  • 1x USB Cable
  • 1x Information sheet

Supplied with

USB cable

Instrumentation Amplifiers, Microchip

Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.

Specifications
Attribute Value
Analogue Function Wheatstone Bridge
Kit Classification Reference Design
Featured Device MCP6N11, MCP6V26, MCP6V27
Temporarily out of stock - back order for despatch 03/03/2020, delivery within 4 working days from despatch date
Price Each
MYR 181.83
units
Per unit
1 +
MYR181.83
Related Products
This pHAT provides a super affordable high-quality DAC ...
Description:
This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin GPIO header. Use pHAT DAC to build a tiny, lush-sounding streaming music ...
The STEVAL-MIC001V1 daughterboard is designed to be used ...
Description:
The STEVAL-MIC001V1 daughterboard is designed to be used in conjunction with the X-NUCLEO-CCA02M1 expansion board, it is able to export the four additional PDMs for any user application requirement (NBW algorithm detection). 4 x MP34DT05-A top port digital MEMS microphonesDaughterboard ...
The ADCMP605 is a Rail-to-Rail, Very Fast, 2.5V ...
Description:
The ADCMP605 is a Rail-to-Rail, Very Fast, 2.5V to 5.5V, Single-Supply LVDS Comparator. Low glitch LVDS-compatible output stage1.6ns propagation delay37mW at 2.5VShutdown pinSingle-pin control for programmable hysteresis and latch.
The Microchip PIC32 Audio DAC Daughter Board is ...
Description:
The Microchip PIC32 Audio DAC Daughter Board is a high-performance stereo digital-to-analogue converter (DAC) board for selected PIC32 hardware development platforms. This board is suitable for adding audio output capabilities to the PIC32 Bluetooth Starter Kit (Microchip part DM320018) and ...