FTDI Chip Plug In Power Supply 9V dc, 1A, 1 Output, 2-Pin Type C - EuroPlug

  • RS Stock No. 720-3739
  • Mfr. Part No. VNCLO-PSU-EU
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Vinco Development Module

The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and supports connectivity to a wide range of application boards developed by the Arduino open-source community. These include Ethernet, motor control, LCD and many others.

Microcontroller: VNC2-64Q, Variable clock speed: 12/24/48MHz
Flash memory: 256KB, RAM: 16KB
Operating voltage: +5V, Input power supply: +9V
Digital I/O: 30, Analogue I/O: 8
USB port: 2 – configurable for host or device operation
Superset of the Arduino Duemilanove / Uno development boards
FTDI Integrated Development Environment (IDE) including code editor, compiler, assembler and debugger, supplied free of charge and supporting ANSI C coding for easy portability and maintainability
Precompiled drivers for a variety of interfaces e.g. USB, UART, SPI
Precompiled driver support for a wide range of USB host classes including Mass Storage, Human Interface Devices (keyboards, mice), audio devices, video devices (webcam) with many more under development
Compatible with existing Arduino shields
A software configuration wizard is currently under development

Note

The description above applies to the Vinco Development Platform RS 720-3723 only, information may not apply to accessories and power supplies

Specifications
Attribute Value
Plug Type Type C
Output Voltage 9 V dc
Input Voltage 100 V ac, 110 V ac, 115 V ac, 120 V ac, 127 V ac, 220 V ac, 230 V ac, 240 V ac
Output Current 1A
Maximum Temperature +40°C
Input Connector EU Plug
Number of Outputs 1
Power Rating 9W
262 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 40.70
units
Per unit
1 +
MYR40.70
Related Products
The recommended power supply unit (PSU) for the ...
Description:
The recommended power supply unit (PSU) for the Raspberry Pi 3. This mains power supply has a 1.5m cable and micro USB plug. • Short circuit, overcurrent and over-voltage protection • Low standby current consumption.
Plug-in power supplies outputting a fixed, non-stabilised DC ...
Description:
Plug-in power supplies outputting a fixed, non-stabilised DC voltage.Standard version supplied with a bridge rectifier and a capacitor.Supplied with an approx. 1.7 m connector lead and an output connector with an internal diameter of 2.1 mm and an external diameter ...
Energy saving power supplyNo load power consumption ≤0.3WCompact, ...
Description:
Energy saving power supplyNo load power consumption ≤0.3WCompact, lightweight2m output lead with polarity inverter & connectorsRegulated outputOperating temperature 0 to +40 °CHigh voltage test 3kV transformer primary/secondaryMedical approved versions to EN60601-1, leakage current ≤10μA and power on indicators.
Power Supply Units for use with KME Legacy ...
Description:
Power Supply Units for use with KME Legacy Replacement Head and Chassis Monitors. Compact Enclosure90-265V AC, 50-60HzLocking 3 pin DIN DC Connector.