Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Read more Read less

Filters

Viewing 1 - 20 of 48 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS Stock No. 158-5372
Mfr. Part No.26 16 200
BrandKnipex
MYR178.29
Each
units
- - Snipe Nose Cutting Pliers 200 mm 73mm - - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS Stock No. 815-6378
Mfr. Part No.95 05 155 SB
BrandKnipex
MYR106.26
Each
units
- - Shear Cutter 155 mm - - - - Stainless Steel - - - - -
RS Stock No. 763-8160
Mfr. Part No.73 72 180
BrandKnipex
MYR306.82
Each
units
- - Diagonal 180 mm - - - - Chrome Vanadium Steel 5.5mm - - 3.2mm -
RS Stock No. 158-5366
Mfr. Part No.25 06 160
BrandKnipex
MYR131.59
Each
units
- - Diagonal 160 mm 50mm - - - Vanadium Electric Steel 2.5mm - - 1.6mm -
RS Stock No. 287-8653
Mfr. Part No.78 13 125 ESD
BrandKnipex
MYR136.43
Each
units
- - Diagonal 125 mm - - - - - - - - - -
RS Stock No. 106-161
Mfr. Part No.68 01 180
BrandKnipex
MYR83.41
Each
units
- - End Cutter 180 mm - - - - Tool Steel 4mm - - 2.5mm -
RS Stock No. 187-8270
Mfr. Part No.64 12 115
BrandKnipex
MYR213.71
Each
units
- - End Cutter 115 mm 6mm - - - Tool Steel 2mm - - 0.5mm -
RS Stock No. 763-8154
Mfr. Part No.73 02 160
BrandKnipex
MYR183.07
Each
units
- - Diagonal 160 mm - - - - Chrome Vanadium Steel 12mm - - 2.7mm -
RS Stock No. 248-1962
Mfr. Part No.74 91 250
BrandKnipex
MYR235.12
Each
units
- - Semi-Flush 250 mm - - - - Chrome Vanadium Steel 5mm - - 3.8mm -
RS Stock No. 248-1934
Mfr. Part No.72 01 140
BrandKnipex
MYR172.36
Each
units
- - Diagonal Cutter 140 mm - - - - - - - - - -
RS Stock No. 158-5344
Mfr. Part No.74 06 180
BrandKnipex
MYR187.21
Each
units
- - VDE High Leverage Diagonal Cutters 180 mm - - - - - - - - - -
RS Stock No. 297-1954
Mfr. Part No.26 27 200
BrandKnipex
MYR224.67
Each
units
- - Snipe Nose Side Cutter 200 mm 73mm Yes - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS Stock No. 763-8163
Mfr. Part No.73 05 160
BrandKnipex
MYR214.65
Each
units
- - Diagonal 160 mm - - - - Chrome Vanadium Steel 12mm - - 2.7mm -
RS Stock No. 248-1877
Mfr. Part No.61 01 200
BrandKnipex
MYR262.14
Each
units
- - End Cutter 200 mm - - - - Vanadium Electric Steel 6mm - - 3.5mm -
RS Stock No. 763-8166
Mfr. Part No.73 06 160
BrandKnipex
MYR213.81
Each
units
- - Diagonal 160 mm - Yes - - Chrome Vanadium Steel 12mm - - 2.7mm -
RS Stock No. 158-5732
Mfr. Part No.78 13 125
BrandKnipex
MYR123.60
Each
units
- - Electronics Diagonal Cutter 125 mm - - - - - - - - - -
RS Stock No. 106-155
Mfr. Part No.68 01 160
BrandKnipex
MYR69.40
Each
units
- - End Cutter 160 mm - - - - Tool Steel 4mm - - 2.3mm -
RS Stock No. 288-910
Mfr. Part No.78 91 125 RS
BrandKnipex
MYR141.27
Each
units
- - Electronics Diagonal Cutter 125 mm - - - - - - - - - -
RS Stock No. 442-0925
Mfr. Part No.26 12 200 SB
BrandKnipex
MYR134.45
Each
units
- - Diagonal 200 mm 73mm - - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS Stock No. 815-6394
Mfr. Part No.77 32 120 H ESD
BrandKnipex
MYR673.07
Each
units
- - Diagonal 120 mm 14mm - - Yes Carbide 0.6mm - - 0.6mm -