Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 101 - 120 of 160 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 896-2195
    Mfr. Part No.P01102125Z
    MYR82.05
    1 Set
    Set(s)
    Shrouded Plug - - - 4mm - 1000V CAT IV 1000 V -30°C +60°C CAT IV
    RS Stock No. 122-9729
    Mfr. Part No.66.9007-150-21+66.9007-150-22
    BrandStaubli
    MYR130.25
    Each
    units
    Test Probe Kit - Straight to Right Angle - 1.5m 20A 1000V CAT II 1000 V - +350°C CAT II
    RS Stock No. 433-2597
    Mfr. Part No.SET3227
    MYR189.19
    Each
    units
    Probe Set - Crocodile Clip - 1m - - - - - -
    RS Stock No. 896-2199
    Mfr. Part No.P01102127Z
    MYR85.31
    1 Set
    Set(s)
    - - - - - - 1000V CAT IV 1000 V - - CAT IV
    RS Stock No. 179-9413
    Mfr. Part No.BU-PB60-2
    MYR34.90
    Each
    units
    Test Lead - 4 mm Banana Plug - 1.5m 15A 1000V - - - -
    RS Stock No. 179-9407
    Mfr. Part No.BU-PB24-2
    MYR33.11
    Each
    units
    Test Lead - 4 mm Banana Plug - 610mm 15A 1000V - - - -
    RS Stock No. 179-9408
    Mfr. Part No.BU-PB36-0
    MYR33.11
    Each
    units
    Test Lead - 4 mm Banana Plug - 0.9m 15A 1000V - - - -
    RS Stock No. 179-9393
    Mfr. Part No.BU-P4911B-24-9
    MYR136.08
    Each
    units
    Test Lead - 4 mm Banana Plug - 609.6mm 20A 600 V, 1000 V CAT II 600 V - - CAT II
    RS Stock No. 179-7909
    Mfr. Part No.AL 8321 / ZPK / 1 / 100 / SW
    MYR50.70
    Each
    units
    Test Lead - 4 mm Safety Plug - 56.5mm 19A 600V CAT II 600 V -10°C +70°C CAT II
    RS Stock No. 179-7888
    Mfr. Part No.LB 4-RKS Sn / 8.4 / RT
    MYR28.00
    Each
    units
    - - 4 mm Socket - 22.5mm 32A 1000V - -40°C +80°C -
    RS Stock No. 179-9403
    Mfr. Part No.BU-PB12-2
    MYR31.18
    Each
    units
    Test Lead - 4 mm Banana Plug - 300mm 15A 1000V - - - -
    RS Stock No. 605-7377
    Mfr. Part No.TLA-116
    MYR87.13
    Each
    units
    Test Lead - Crocodile Clip, Hook Clip - 500mm - 100V CAT III 100 V - - CAT III
    RS Stock No. 179-7902
    Mfr. Part No.SKURZ 6100/19-4 IG 2MB Ni/GE
    MYR29.90
    Each
    units
    - - - - - - - - - - -
    RS Stock No. 753-1826
    Mfr. Part No.IBU 5568 / GN
    MYR10.77
    Each
    units
    - - - - - - - - - - -
    RS Stock No. 179-7890
    Mfr. Part No.LB 4-RKS Ni / 8.4 / RT
    MYR28.00
    Each
    units
    - - 4 mm Socket - 22.5mm 32A 1000V - -40°C +80°C -
    RS Stock No. 179-9412
    Mfr. Part No.BU-PB60-0
    MYR34.90
    Each
    units
    Test Lead - 4 mm Banana Plug - 1.5m 15A 1000V - - - -
    RS Stock No. 179-7904
    Mfr. Part No.SKURZ 6100/19-4 IG 2MB Ni/RT
    MYR29.90
    Each
    units
    - - - - - - - - - - -
    RS Stock No. 179-9416
    Mfr. Part No.BU-PB72-2
    MYR33.94
    Each
    units
    Test Lead - 4 mm Banana Plug - 1828.8mm 15A 1000V - - - -
    RS Stock No. 179-9405
    Mfr. Part No.BU-PB18-2
    MYR31.81
    Each
    units
    Test Lead - 4 mm Banana Plug - 457.2mm 15A 1000V - - - -
    RS Stock No. 179-9415
    Mfr. Part No.BU-PB72-0
    MYR33.94
    Each
    units
    Test Lead - 4 mm Banana Plug - 1828.8mm 15A 1000V - - - -
    Related Products
    IDM70 Series Compact Multimeters with high performance. Large ...
    Description:
    IDM70 Series Compact Multimeters with high performance. Large scale display6000 display countDCA μA Data HoldMin/ Max function Frequency Counter Capacitance Measurement Auto Power Off Shock resistant (1m drop) Protective Holster with tilt stand and lead storage.
    All-Metal Versions as Well as Types for Insulated ...
    Description:
    All-Metal Versions as Well as Types for Insulated Fitting. Shock-Proof Safety Sockets for Use Up to 1000 V.Safety Sockets to Adapt From Old 4 Mm Sockets.Terminations for Printed Circuit Board, for Cable Lugs or with Push-On Connection.Loading Up to 32 ...
    Also Shock-Proof Versions for Use Up to 1000 ...
    Description:
    Also Shock-Proof Versions for Use Up to 1000 V.Adapter Leads to Connect From 2 Mm / 2.4 Mm to 4 Mm Systems.Highly Flexible Leads with Double Insulation for Double Safety.Reliable Solutions for Adaption to Safety Technology Required By the Trade ...
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of ...