Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 61 - 80 of 160 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
    RS Stock No. 236-6677
    Mfr. Part No.GE 7130
    BrandSefram
    MYR283.73
    Each
    units
    High Frequency Probe - - - - - - - - - -
    RS Stock No. 775-681
    Mfr. Part No.932959001
    MYR117.79
    Each
    units
    Micro Test Equipment Set - Miniature Crocodile Clip, Spring Loaded Plug, Spring Loaded Socket - 1m - - - -15°C +70°C -
    RS Stock No. 122-9727
    Mfr. Part No.66.9008-150-21+66.9008-150-22
    MYR92.00
    Each
    units
    Test Probe Kit - Straight to Right Angle - 1.5m 20A 1000V CAT II 1000 V - +350°C CAT II
    RS Stock No. 493-3285
    Mfr. Part No.TP88
    BrandFluke
    MYR161.70
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - -
    RS Stock No. 106-0429
    Mfr. Part No.80PK-1
    BrandFluke
    MYR258.30
    Each
    units
    Bead Probe - Miniature Thermocouple - 1m - - - - +200 °C, +260 °C -
    RS Stock No. 518-1019
    Mfr. Part No.99.00191
    MYR212.09
    1 Set
    Set(s)
    Test Lead - Right Angle Plug, Straight Plug - 1m 19A 1000V CAT II 1000 V - - CAT II
    RS Stock No. 726-3630
    Mfr. Part No.TP220-1
    BrandFluke
    MYR131.45
    Each
    units
    Test Probe Kit - - - - 10A 1000V CAT II 1000 V - - CAT II
    RS Stock No. 122-9728
    Mfr. Part No.66.9007-100-21+66.9007-100-22
    MYR100.78
    Each
    units
    Test Probe Kit - Straight to Right Angle - 1m 20A 1000V CAT II 1000 V - +350°C CAT II
    RS Stock No. 726-3637
    Mfr. Part No.TL223-1
    BrandFluke
    MYR542.85
    Each
    units
    Electrical Test Lead Kit - Crocodile Clip, Flat Blade, Straight to Right Angle - 1.5m - 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C CAT III, CAT IV
    RS Stock No. 450-9400
    Mfr. Part No.935982256
    MYR337.95
    1 Kit
    Kit(s)
    Test Lead Kit - Crocodile Clip - - - - - -25°C +100 °C, +80 °C -
    RS Stock No. 254-8144
    Mfr. Part No.DX02002
    BrandCatu
    MYR193.93
    Each (In a Pack of 2)
    units
    Test Probe - - - 1.2m 20A 1000V CAT III 1000 V - - CAT III
    RS Stock No. 384-8265
    Mfr. Part No.TP38
    BrandFluke
    MYR142.80
    Each
    units
    Insulated Probe Tip - - - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 453-6323
    Mfr. Part No.CCA-111
    MYR92.69
    1 Bag of 1
    Bag(s)
    Test Lead - - - - - - - - - -
    RS Stock No. 850-7694
    Mfr. Part No.AC280
    BrandFluke
    MYR258.30
    1 Set(s)
    units
    - - Hook Clip - 0.2in 3A 1000 V, 300 V CAT III 1000 V, CAT IV 300 V - - CAT III, CAT IV
    RS Stock No. 455-0571
    Mfr. Part No.AC280
    BrandFluke
    MYR217.02
    1 Set
    Set(s)
    Hook Clip Set - Hook Clip - - 3A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 606-0216
    Mfr. Part No.TLA-117
    MYR60.63
    Each
    units
    Test Lead - Crocodile Clip - 500mm - 100V CAT III 100 V - - CAT III
    RS Stock No. 726-3621
    Mfr. Part No.TP2-1
    BrandFluke
    MYR142.80
    Each
    units
    Test Probe Kit - - - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - CAT III, CAT IV
    RS Stock No. 517-4689
    Mfr. Part No.TLK291
    BrandFluke
    MYR602.70
    Each
    units
    Test Probe Kit - Plug Yes - 500mA 1000V CAT III 1000 V 0°C +40°C CAT III
    RS Stock No. 606-0222
    Mfr. Part No.TLA-13
    MYR34.05
    Each
    units
    Test Lead - Crocodile Clip - 200mm 1A 100V CAT III 100 V - - CAT III
    RS Stock No. 881-2781
    Mfr. Part No.AC288
    BrandFluke
    MYR258.30
    Each
    units
    Extension Lead Set - Retractable Tip - 8.4mm - 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C CAT III, CAT IV
    Related Products
    IDM70 Series Compact Multimeters with high performance. Large ...
    Description:
    IDM70 Series Compact Multimeters with high performance. Large scale display6000 display countDCA μA Data HoldMin/ Max function Frequency Counter Capacitance Measurement Auto Power Off Shock resistant (1m drop) Protective Holster with tilt stand and lead storage.
    All-Metal Versions as Well as Types for Insulated ...
    Description:
    All-Metal Versions as Well as Types for Insulated Fitting. Shock-Proof Safety Sockets for Use Up to 1000 V.Safety Sockets to Adapt From Old 4 Mm Sockets.Terminations for Printed Circuit Board, for Cable Lugs or with Push-On Connection.Loading Up to 32 ...
    Also Shock-Proof Versions for Use Up to 1000 ...
    Description:
    Also Shock-Proof Versions for Use Up to 1000 V.Adapter Leads to Connect From 2 Mm / 2.4 Mm to 4 Mm Systems.Highly Flexible Leads with Double Insulation for Double Safety.Reliable Solutions for Adaption to Safety Technology Required By the Trade ...
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of ...