Electrical Installation Testers

Electrical installation testers verify the safety of electrical installations in domestic, commercial and industrial settings. They ensure that fixed wiring is safe and correctly installed to meet relevant local standards and safety requirements. 


Uses of electrical installation testers


You can use electrical installation testers for a variety of tests, including:

  • Insulation-continuity tests – diagnose breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The quality of insulation is critical in ensuring uninterrupted and safe functioning of electrical circuits.  
  • Checking RCD devices – check the proper functioning of residual-current devices (RCDs). RCDs are designed to disconnect quickly to mitigate the harm caused from electric shock and to avoid current leaks that may lead to fire and other dangerous situations. 
  • Loop testing – a quick, convenient, and specific method of evaluating an electrical circuit's ability to engage protective devices (circuit breakers, fuses, RCDs). A ground loop determines the effectiveness of protective devices.
  • Resistance measurement of grounding systems – verification tests to ensure that a system's resistance is low enough to provide protection to people, equipment and structures. 

...
Read more Read less

Filters

Viewing 1 - 20 of 22 products
Results per page
Description Price Loop Impedance Test Type Automatic RCD Test RCD Ramp Test Non-Tripping Insulation Test Voltage Maximum Voltage Measurement Test Type Earth Resistance Measurement Downloadable Data Interface Type Continuity Test Current RCD Test Type Remote Switch Mode Test Standards
RS Stock No. 704-0487
Mfr. Part No.1002-415
BrandMegger
MYR8,013.16
Each
units
2 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity, Wiring Polarity Yes Yes German Mains 15 mA, 200 mA AC Type, DC Selective - BS 7671, IEC 60364, IEC 61010-031, IEC 61010-1, IEC 61010-30, IEC 61557, VDE 0100
RS Stock No. 117-6027
Mfr. Part No.1008-123
BrandMegger
MYR5,937.24
Each
units
2 Wire, 3 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity Yes - Wireless 200mA A, AC, B, S - EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
RS Stock No. 117-6665
Mfr. Part No.FLK-1662 SCH
BrandFluke
MYR6,971.05
Each
units
Phase to Earth, Phase to Neutral Yes Yes - 100 V, 250 V, 500 V, 1000 V 500V ac/dc Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity - - - 10mA A/F, AC Type, G, S Yes -
RS Stock No. 117-6028
Mfr. Part No.1008-128
BrandMegger
MYR6,974.72
Each
units
2 Wire, 3 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity Yes Yes Wireless 200mA A, AC, B, S - EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
RS Stock No. 117-6666
Mfr. Part No.FLK-1663 SCH
BrandFluke
MYR9,873.96
Each
units
Phase to Earth, Phase to Neutral Yes Yes - 50 V, 100 V, 250 V, 500 V, 1000 V 500V ac/dc Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity Yes - USB 10mA A/F, AC Type, B/B+, G, S Yes -
RS Stock No. 117-6030
Mfr. Part No.1008-130
BrandMegger
MYR7,988.74
Each
units
2 Wire, 3 Wire Yes Yes Yes 100 V, 250 V, 500 V, 1000 V 600V Continuity Yes Yes Wireless 200mA A, AC, B, S - EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
RS Stock No. 799-9011
Mfr. Part No.P01157702
MYR24,462.42
Each
units
- - - - - - Wiring Polarity - Yes USB - - - EN 61010-I
RS Stock No. 712-6023
Mfr. Part No.MI-3125
BrandMetrel
MYR3,832.82
Each
units
3 Wire Yes - Yes - 550V ac Continuity Yes - - - - - -
RS Stock No. 117-6026
Mfr. Part No.1008-121
BrandMegger
MYR4,329.02
Each
units
2 Wire, 3 Wire Yes Yes Yes 250 V, 500 V, 1000 V 600V Continuity Yes - Wireless 200mA A, AC, S - EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
RS Stock No. 123-8205
Mfr. Part No.MW9660
BrandMetrel
MYR3,969.97
Each
units
3 Wire Yes - Yes 1000V 550V - Yes Yes - 200mA - - AS/NZ 376, BS 7671, EN 60364-4-41, EN 61008, EN 61009
RS Stock No. 899-8201
Mfr. Part No.M503A
MYR6,431.78
Each
units
Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes DIN VDE 0100-600, IEC 60364-6
RS Stock No. 867-5627
Mfr. Part No.M520R
MYR9,119.75
Each
units
- Yes Yes Yes 3700V 500V Wiring Polarity Yes Yes - - AC Type, DC Selective - IEC 60364-6
RS Stock No. 785-7907
Mfr. Part No.KT63
MYR2,611.68
Each
units
3 Wire Yes Yes Yes 1000V dc 250V Continuity - - - 200mA AC Type - BS 7671
RS Stock No. 146-2605
Mfr. Part No.T6-1000
BrandFluke
MYR1,530.14
Each
units
- - - - - - - - - - - - - -
RS Stock No. 136-5808
Mfr. Part No.M500Y
MYR16,965.61
Each
units
Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R - IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
RS Stock No. 899-7378
Mfr. Part No.FC5300FR
BrandSibille
MYR39,355.34
Each
units
Phase to Phase - - - - - - - - - - - - -
RS Stock No. 899-8208
Mfr. Part No.M520T
MYR4,963.06
Each
units
3 Wire Yes Yes Yes 1000V 600V Wiring Polarity Yes - - 15mA AC Type, DC Selective Yes EN 61557, IEC 61557, VDE 0413
RS Stock No. 136-5807
Mfr. Part No.M500V
MYR11,997.01
Each
units
Line to Earth Yes Yes - 1000V 500V Auto Test, RCD Test, RCD Trip Current, RCD Trip Time Yes Yes Bluetooth - B, B+, G, R - IEC 60364-6, IEC 61851, IEC/EN 61010-1, IEC/EN 61557
RS Stock No. 899-8205
Mfr. Part No.M503B
MYR7,926.66
Each
units
Phase to Earth, Phase to Neutral - Yes - 3700V 600V Wiring Polarity Yes - - 15mA DC Selective Yes DIN VDE 0100-600, IEC 60364-6
RS Stock No. 899-7362
Mfr. Part No.FC30006FRV2
BrandSibille
MYR68,216.92
Each
units
- - - - - - - - - - - - - -
Related Products
Using FieldSense Technology the T6-600 measures voltage up ...
Description:
Using FieldSense Technology the T6-600 measures voltage up to 600 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...
Megger Duplex probe 1 connect handspike with sprung ...
Description:
Megger Duplex probe 1 connect handspike with sprung loaded tips fitted with a connector socket for easy connection to any connector test lead. Replaceable probe tips have hardened needle points, gold plated for excellent low-resistance contact. Tips are sprung to ...
Powersuite Professional Contractor offers all the features of ...
Description:
Powersuite Professional Contractor offers all the features of PowerSuite Lite with the addition of a data based client, assets and results management database for managing 17th Edition electrical and Portable Appliance test results. All records and downloaded data is allocated ...
3-phase current adapter for connecting test instruments to ...
Description:
3-phase current adapter for connecting test instruments to 5-pole CEE outlets. These adapters correspond to 5-pole CEE sockets with nominal current Phase sequence testing with signal lamps Testing for effectiveness of protective measures with five 4mm contact protected sockets.