Bearing Units - Inserts & Accessories

Filters

Viewing 181 - 192 of 192 products
Results per page
Description Price Material Inside Diameter Outside Diameter Static Load Rating Dynamic Load Rating
RS Stock No. 748-948
Mfr. Part No.1017-15G
BrandNSK-RHP
MYR92.34
Each
units
- 15mm 40mm 4.8kN 9.55kN
RS Stock No. 785-4879
Mfr. Part No.1030-30DECG
BrandNSK-RHP
MYR134.09
Each
units
- 30mm 44.5mm 11.3kN 19.5kN
RS Stock No. 785-4977
Mfr. Part No.1130-1
BrandNSK-RHP
MYR106.80
Each
units
- 1in 40.3mm 11.3kN 19.5kN
RS Stock No. 785-4885
Mfr. Part No.1040-40DECG
BrandNSK-RHP
MYR221.42
Each
units
- 40mm 60.3mm 19.9kN 32.5kN
RS Stock No. 174-1067
Mfr. Part No.GYE50-XL-KRR-B
BrandINA
MYR320.50
Each
units
- 50mm 90mm 23200N 37500N
New
RS Stock No. 195-9626
Mfr. Part No.YAR 207-2RF/HV
BrandSKF
MYR641.42
Each
units
- 35mm 72mm 15.3kN 21.6kN
New
RS Stock No. 195-9618
Mfr. Part No.SY 35 FM
BrandSKF
MYR241.53
Each
units
Cast Iron 35mm - 15.3kN 25.5kN
New
RS Stock No. 192-9870
Mfr. Part No.1135-30
BrandNSK
MYR154.42
Each
units
- 30mm 72mm 15300N 25700N
RS Stock No. 797-5140
Mfr. Part No.E2.YET 205
BrandSKF
MYR150.48
Each
units
- 25mm 52mm 7.8kN 14kN
RS Stock No. 174-1399
Mfr. Part No.RAE20-XL-NPP-B
BrandINA
MYR149.43
Each
units
- 20mm 47mm 6600N 13600N
New
RS Stock No. 192-9869
Mfr. Part No.1120-20CG
BrandNSK
MYR104.34
Each
units
- 20mm 47mm 6650N 12800N
RS Stock No. 194-6884
Mfr. Part No.GLE40-XL-KRR-B
BrandINA
MYR316.53
Each
units
- 40mm 80mm 34500N 19800N
Related Products
INA from Schaeffler classic radial insert ball bearings ...
Description:
INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of ...
Radial insert ball bearings are single row, ready-to-fit ...
Description:
Radial insert ball bearings are single row, ready-to-fit units comprising a solid outer ring, an inner ring extended on one or both sides, cages made from plastic or sheet steel and seals of type P, R, L or T. Bearings ...
When selecting bearings for any purpose, ultimately you ...
Description:
When selecting bearings for any purpose, ultimately you want to be certain of achieving the required level of equipment performance – and at the lowest possible cost. Robustness also is very important because the conditions in which your equipment is ...
For use with self-lube sealed bearing units or ...
Description:
For use with self-lube sealed bearing units or with user's own housings. Bearings are secured onto the shaft with a set-screw lock. When the axial load exceeds the limiting value, a shoulder should be provided on the shaft for the ...