Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 81 - 100 of 669 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Connector B - Gender Body Material Angle Swivel Connection Mounting Type Manufacturer Series Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature Thread Material
RS Stock No. 144-2609
BrandRS PRO
MYR57.75
1 Bag of 10
Bag(s)
Threaded-to-Tube R 1/8 Push In 4 mm Male - Plastic - No - - 9.9 kgf/cm², 990 kPa +60°C 0°C Brass
RS Stock No. 176-0965
BrandRS PRO
MYR23.725
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/4 Push In 10 mm Male - Brass 90° Yes - - - - - Brass
RS Stock No. 916-0766
BrandRS PRO
MYR11.674
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 4 mm Male - Polyoxymethylene - No - - 10 bar +60°C 0°C Nickel Plated Brass
RS Stock No. 176-1337
BrandRS PRO
MYR15.529
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 8 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 176-2176
BrandRS PRO
MYR181.401
Each (In a Pack of 10)
units
Tube-to-Tube Push In 6 mm Push In 6 mm - - Stainless Steel - No - - 20 bar +200°C -15°C -
RS Stock No. 176-1341
BrandRS PRO
MYR13.19
Each (In a Pack of 10)
units
Threaded-to-Tube M7 Push In 4 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 176-2168
BrandRS PRO
MYR381.334
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - Stainless Steel 90° Yes - - 20 bar +200°C -15°C -
RS Stock No. 144-2618
BrandRS PRO
MYR150.10
1 Bag of 10
Bag(s)
Threaded-to-Tube R 3/8 Push In 10 mm Male - Plastic - No - - 9.9 kgf/cm², 990 kPa +60°C 0°C Brass
RS Stock No. 299-4064
BrandRS PRO
MYR14.106
Each (In a Pack of 5)
units
Threaded-to-Tube R 3/8 Push In 8 mm Male - - 90° No - - 15 bar +70°C -18°C -
RS Stock No. 176-1351
BrandRS PRO
MYR22.17
Each (In a Pack of 10)
units
Threaded-to-Tube R 3/8 Push In 8 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 187-5705
BrandRS PRO
MYR350.50
1 Bag of 10
Bag(s)
Threaded-to-Tube G 1/4 Push In 10 mm Male - Brass 90° No Inline 55000 20 bar +80°C -20°C Nickel Plated Brass
RS Stock No. 176-1814
BrandRS PRO
MYR30.831
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/2 Push In 10 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 176-1332
BrandRS PRO
MYR12.18
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 4 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 176-2215
BrandRS PRO
MYR407.339
Each (In a Pack of 10)
units
Threaded G 1/2 G 1/2 Female Female Stainless Steel 90° No - - 140 bar +300°C -110°C -
RS Stock No. 916-0788
BrandRS PRO
MYR17.211
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/8 Push In 10 mm Male - Polyoxymethylene - No - - 10 bar +60°C 0°C Nickel Plated Brass
RS Stock No. 176-1338
BrandRS PRO
MYR15.926
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 8 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 187-5702
BrandRS PRO
MYR171.21
1 Bag of 10
Bag(s)
Threaded-to-Tube G 1/8 Push In 4 mm Male - Brass 90° No Inline 55000 20 bar +80°C -20°C Nickel Plated Brass
RS Stock No. 176-1812
BrandRS PRO
MYR21.148
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 10 mm Male - - 90° Yes - - 20 bar +80°C -20°C Brass
RS Stock No. 176-0953
BrandRS PRO
MYR10.842
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - Brass 90° No - - - - - Brass
RS Stock No. 187-5701
BrandRS PRO
MYR159.75
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 6 mm Male - Brass 90° No Inline 55000 20 bar +80°C -20°C Nickel Plated Brass
Related Products
Connects 2 tubes through a panel, providing optimum ...
Description:
Connects 2 tubes through a panel, providing optimum sealing between the fitting and the panel. solid construction, compact, aesthetic and unobtrusive for a better connection, full air flow, individual unit quality control and dating in order to guarantee quality and ...
A quick, low cost method of assembling low ...
Description:
A quick, low cost method of assembling low pressure lines. This push lock system allows for on-site hose assembly to the required customised length. Assembled in seconds without the need for clamps, bands, clips or wires. The hose is a ...
• One-Touch push to connect configuration allows for ...
Description:
• One-Touch push to connect configuration allows for an instant tubing connection• Useful for piping in confined space, due to its six-angle wrench processing inside• Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube ...
90° Swivel elbow adaptors with BSP taper for ...
Description:
90° Swivel elbow adaptors with BSP taper for easy tube insertion for rapid assembly. Use for nylon, polyamide (PA), polurethane (PU) and Hytrel tubingPressure range -750mm Hg to 18 bar (subject to tube type)All tapered threads are pre-coated with non-PTFE ...