Pneumatic Elbow Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic elbow threaded-to-tube adaptors being one example.

What are pneumatic elbow threaded-to-tube adaptors used for?

Pneumatic elbow threaded-to-tube adaptors are compact adaptors that can connect either single or multiple hoses.

Types of pneumatic elbow threaded-to-tube adaptors

Pneumatic elbow threaded-to-tube adaptors come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so an assortment of hoses can be attached.


...
Read more Read less

Filters

Viewing 661 - 669 of 669 products
Results per page
Description Price Connection Style Connector A Connector B Connector A - Gender Connector B - Gender Body Material Angle Swivel Connection Mounting Type Manufacturer Series Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature Thread Material
RS Stock No. 771-6092
Mfr. Part No.KQ2VS06-01AS
BrandSMC
MYR25.158
Each (In a Pack of 5)
units
Threaded-to-Tube R 1/8 Push In 6 mm Male - PBT 90° No - KQ2 - +60°C -5°C Brass
RS Stock No. 163-3011
Mfr. Part No.KQ2L06-02AS(10)
BrandSMC
MYR20.378
Each (In a Pack of 10)
units
Threaded-to-Tube R 1/4 Push In 6 mm Male - PBT, Polypropylene 90° No - KQ2 1 MPa +60°C -5°C -
RS Stock No. 124-0161
Mfr. Part No.3169 16 21
BrandLegris
MYR30.162
Each (In a Pack of 5)
units
Threaded-to-Tube G 1/2 Push In 16 mm Male - Plastic - No Inline 3169 20 bar +80°C -20°C Nickel Plated Brass
RS Stock No. 121-6028
Mfr. Part No.QSMLV-M7-4-I
BrandFesto
MYR313.80
1 Bag of 10
Bag(s)
Threaded-to-Tube M5 Push In 4 mm Male - PBT 90° Yes Inline QS 14 bar +80°C -10°C Nickel Plated Brass
RS Stock No. 917-1044
Mfr. Part No.KQ2L08-G02A
BrandSMC
MYR20.46
Each (In a Pack of 10)
units
Threaded-to-Tube G 1/4 Push In 8 mm Male - PBT - - - KQ2 1 MPa, 3 (Proof) MPa +60°C -5°C Brass
RS Stock No. 884-2041
Mfr. Part No.KQG2W12-02S
BrandSMC
MYR312.88
Each
units
Threaded-to-Tube R 1/4 Push In 12 mm Male - Stainless Steel - No - KQG2 1 MPa, 3 (Proof) MPa 150°C -5°C -
RS Stock No. 124-0160
Mfr. Part No.3169 16 17
BrandLegris
MYR29.668
Each (In a Pack of 5)
units
Threaded-to-Tube G 3/8 Push In 16 mm Male - Plastic - No Inline 3169 20 bar +80°C -20°C Nickel Plated Brass
RS Stock No. 2509538084
Mfr. Part No.KQ2L07-34S-X2
BrandSMC
MYR9.58
Each
units
- - - - - - - - - - - - - -
RS Stock No. 2509543761
Mfr. Part No.KQL07-35S
BrandSMC
MYR9.46
Each
units
- - - - - - - - - - - - - -
Related Products
Connects 2 tubes through a panel, providing optimum ...
Description:
Connects 2 tubes through a panel, providing optimum sealing between the fitting and the panel. solid construction, compact, aesthetic and unobtrusive for a better connection, full air flow, individual unit quality control and dating in order to guarantee quality and ...
A quick, low cost method of assembling low ...
Description:
A quick, low cost method of assembling low pressure lines. This push lock system allows for on-site hose assembly to the required customised length. Assembled in seconds without the need for clamps, bands, clips or wires. The hose is a ...
• One-Touch push to connect configuration allows for ...
Description:
• One-Touch push to connect configuration allows for an instant tubing connection• Useful for piping in confined space, due to its six-angle wrench processing inside• Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube ...
90° Swivel elbow adaptors with BSP taper for ...
Description:
90° Swivel elbow adaptors with BSP taper for easy tube insertion for rapid assembly. Use for nylon, polyamide (PA), polurethane (PU) and Hytrel tubingPressure range -750mm Hg to 18 bar (subject to tube type)All tapered threads are pre-coated with non-PTFE ...