Thermal Grease

Thermal grease is known by a number of names including:
• CPU grease
• heat paste
• heat sink compound or paste
• thermal compound, gel or paste
• thermal interface material.
It is a thermally conductive material which is usually electrically insulating which helps to dissipate heat from a device. Its main function is to ensure there is no air space between which would act as a thermal insulator. It fills in the microscopic imperfections on the heatsink and device.
It is most commonly used between a CPU and a heat sink to maximise heat transfer. It is also used on other electronic components which create heat and also need a heat sink such as MOSFET transistors.
There are other types of products to eliminate the air gap under a heat sink:
• Thermal Adhesive
• Thermal Gap Pads

...
Read more Read less

Filters

Viewing 1 - 20 of 22 products
Results per page
Description Price Thermal Conductivity Material Maximum Operating Temperature Minimum Operating Temperature Operating Temperature Range
RS Stock No. 909-2092
BrandRS PRO
MYR430.44
Each
units
3.4W/m·K - +125°C -30°C -30 → +125 °C
RS Stock No. 915-6118
BrandRS PRO
MYR95.86
Each
units
4W/m·K Non-Silicone +150°C -50°C -50 → +153 °C
RS Stock No. 707-4724
BrandRS PRO
MYR112.41
Each
units
3.6W/m·K Silicone +180°C -40°C -40 → +180 °C
RS Stock No. 127-035
Mfr. Part No.TIC1000A-00-00-5.0CC
BrandBergquist
MYR354.35
Each
units
1.5W/m·K Non-Silicone +150°C - Maximum of +150 °C
RS Stock No. 915-6105
BrandRS PRO
MYR73.68
Each
units
2W/m·K Non-Silicone +150°C -50°C -50 → +150 °C
RS Stock No. 707-4733
BrandRS PRO
MYR75.97
Each
units
1.8W/m·K Silicone +180°C -40°C -40 → +180 °C
RS Stock No. 707-4736
BrandRS PRO
MYR143.57
Each
units
5W/m·K Silicone +180°C -40°C -40 → +180 °C
RS Stock No. 915-6111
BrandRS PRO
MYR901.80
Each
units
4W/m·K Non-Silicone +150°C -50°C -50 → +152 °C
RS Stock No. 915-6109
BrandRS PRO
MYR536.03
Each
units
2W/m·K Non-Silicone +150°C -50°C -50 → +151 °C
RS Stock No. 277-8200
Mfr. Part No.CT40-5
MYR158.62
Each
units
0.63W/m·K Silicone +200°C -73°C -73 → +200 °C
RS Stock No. 665-4846
Mfr. Part No.CW7270
MYR68.37
Each
units
0.71W/m·K Non-Silicone +200°C -15°C -15 → +200 °C
RS Stock No. 362-9698
Mfr. Part No.GF2000-00-15-50CC
BrandBergquist
MYR548.20
Each
units
2W/m·K Gap Filler 2000 +200°C -60°C -60 → +200 °C
RS Stock No. 665-4855
Mfr. Part No.CW7250
MYR87.30
Each
units
1.85W/m·K Boron Nitride +200°C -73°C -73 → +200 °C
RS Stock No. 124-7692
Mfr. Part No.8617-85ml
MYR188.30
Each
units
1W/m·K - +165°C -68°C -68 → +165 °C
RS Stock No. 774-2697
Mfr. Part No.WLPK 05
MYR121.47
Each
units
10W/m·K Ceramic Synthetic Fluid +150°C -60°C -60 → +150 °C
RS Stock No. 182-6358
Mfr. Part No.XMIF001
MYR17.60
Each
units
- - - - -
RS Stock No. 181-1273
Mfr. Part No.GP300
MYR76.30
Each
units
- Silicone +160°C -50°C -50 → +160 °C
RS Stock No. 182-6360
Mfr. Part No.ERPE7501RP250G
MYR149.60
Each
units
- - +110°C -50°C -50 → +100 °C
RS Stock No. 774-2691
Mfr. Part No.WLPK 10
MYR129.86
Each
units
10W/m·K Ceramic Synthetic Fluid +150°C -60°C -60 → +150 °C
RS Stock No. 362-9682
Mfr. Part No.GF1000-00-15-50CC
BrandBergquist
MYR430.79
Each
units
1W/m·K Gap Filler 1000 +175°C -60°C -60 → +175 °C
Related Products
Dry thermally conductive graphite washers for use where ...
Description:
Dry thermally conductive graphite washers for use where electrical conductivity together with excellent heat transfer are requiredThermal performance is comparable to that of metal-oxide-filled silicone grease but with no shrinkage or drying out over long periods of timeLow electrical resistance ...
Aavid Thermalloy In-Sil-8 series thermal interface pads provide ...
Description:
Aavid Thermalloy In-Sil-8 series thermal interface pads provide thermal conductance and electrical isolation in one package. In-Sil-8 pads are silicone-based insulators that come with thermally conductive fillers to isolate up to 6000 volts AC. In-Sil-8 pads withstand the rigors of ...
The Electrolube GP300 series is a silicone based ...
Description:
The Electrolube GP300 series is a silicone based thermal interface gap pad and comes in square sections. This pad is designed for easy installation and provides high thermal conductivity value of 3W/m.K. It has a wide operating temperature range from ...
This two-part clear amber Polyester resin uses an ...
Description:
This two-part clear amber Polyester resin uses an innovative blend of technologies to provide the same performance as polyurethane resins whilst removing the hazardous isocyanates used to cure them. It is a soft, flexible resin which can easily be dug-out ...