brands

attributes.Features

attributes.Output_Type

attributes.Supply_Voltage

attributes.Size

attributes.Number_of_Inputs

attributes.Number_of_Outputs

attributes.Minimum_Operating_Temperature

attributes.Maximum_Operating_Temperature

attributes.Temperature_Range

attributes.Control_Type

attributes.Display_Type

attributes.IP_Rating

attributes.Additional_Functionality

attributes.Better_World_Product

attributes.Better_World_Verification

attributes.Input_Type

attributes.Mounting_Type

attributes.Range

attributes.Series

Eurotherm EPC3004 Panel Mount PID Controller, 96 x 96mm 1 Input 1 Relay, 2 Logic, 24 V ac/dc Supply Voltage PID

Eurotherm EPC3004 Panel Mount PID Controller, 96 x 96mm 1 Input 1 Logic, 3 Relay, 24 V ac/dc Supply Voltage PID

Eurotherm 3216 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 3 Output Changeover Relay, Logic, Relay, 85 →

Eurotherm 3204 PID Temperature Controller, 96 x 96 (1/4 DIN)mm, 4 Output Analogue, Changeover Relay, Logic, Relay, 85

Eurotherm Power Controller, 229.5 x 117 x 192mm Relay, 500 V Supply Voltage 1 Phase

Eurotherm 3216 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 3 Output Changeover Relay, Logic, Relay, 24 V ac/dc

Eurotherm 3216 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 3 Output Changeover Relay, Relay, 85 → 264 V ac


A temperature controller is a device which has been built to help control temperature. The best part is there is no extension involvement. This device usually carries out such functionalities based on process variables. After that, the desired value will be compared. The differences which exist between such values are referred to as error derivation. A temperature control device will use such errors in determining the amount of cooling or heating, which is needed for the temperature to return to its desired value. Manipulated signal is the output value produced by a temperature switch. It can be said that this device is all about temperature control.

## **Types of Temperature Controller**

### **PID Temperature Controller**

A Proportional-Integral-Derivative (PID) temperature controller is a sophisticated component of a temperature control system. To illustrate its functionality, consider an oven setup that includes a heater, thermometer, and the PID controller itself. The primary function of the PID controller is to continuously monitor the temperature via the thermometer and make adjustments to the heater to maintain a consistent temperature. 

PID controllers are known for their accuracy and are widely used in applications where precise temperature control is critical. They work by continuously adjusting the process to minimise the error, ensuring that the temperature remains stable even under varying conditions.

The working principle of a PID controller involves three key components:

- **Proportional Control (P):** Adjusts the output proportionally to the current error. If the temperature deviates significantly from the setpoint, the controller will apply a larger correction.
- **Integral Control (I):** Accumulates past errors over time, addressing any persistent discrepancies. If the temperature remains below the setpoint for an extended period, the integral action increases the output to eliminate the error.
- **Derivative Control (D):** Anticipates future errors based on the rate of change of the temperature, helping to mitigate overshoot and stabilise the system as it approaches the setpoint.

### **Digital Temperature Controller**

Digital temperature controllers represent a modern approach to temperature management, typically categorised into two main series:

- **DTC-A Series**: This series is designed for precise heating applications. Unlike traditional controllers, DTC-A series controllers don’t require external relays, as they’re capable of directly controlling temperature. These controllers are also programmable, allowing for temperature adjustments at specific time intervals. Additionally, they can memorise both temperature settings and time, making them highly adaptable to various heating requirements, particularly in flexible heaters.
- **DTC-T Series**: The DTC-T series controllers are versatile, capable of monitoring both DC and AC voltages. These electronic temperature controllers are characterised by low electromagnetic interference and minimal voltage output, making them suitable for sensitive applications. These controllers come with adapters for better customisation of temperature settings and time intervals. Like the DTC-A series, they can memorise settings, eliminating the need for complex circuit designs or additional controls. They also feature multiple power settings, including 100%, 75%, 50%, and 25%, offering flexibility in temperature management.

### **On/Off Temperature Controllers**

On/Off controllers are the simplest type of temperature controller. They operate by switching the heating or cooling device ON when the temperature drops below a setpoint and OFF when it exceeds that setpoint. While effective for basic applications, they lack the precision of more advanced PID temp controllers and are typically used in systems where tight temperature control is not critical, such as residential heating systems and basic industrial processes.

### **Proportional Temperature Controllers**

Proportional temperature controllers offer a more advanced approach compared to On/Off controllers. They modulate the output based on the difference between the actual temperature and the setpoint. This proportional response allows for more precise temperature control, making them suitable for applications like incubators and HVAC systems.

## **Choosing the Right Temperature Controllers**

When selecting a temperature controller, several critical factors must be evaluated to ensure it meets your specific process requirements:

- **Temperature Range:** Determine the minimum and maximum temperature limits required for your application. This will help you select a temperature controller that can operate effectively within the desired range.
- **Control Accuracy:** Assess the level of precision needed for your temperature control. Some applications may require high accuracy, while others may tolerate broader tolerances. Look for controllers with low tolerance levels and high-resolution sensors to achieve the necessary precision.
- **Control Stability:** Evaluate the stability requirements of your process. Applications that demand consistent results will require controllers that can maintain tight temperature stability, while others may allow for slight fluctuations.
- **Control Algorithm:** Different control algorithms, such as On/Off, Proportional, and PID (Proportional-Integral-Derivative), offer varying levels of control performance. PID temp controllers are particularly effective for applications requiring precise and stable temperature regulation.
- **Response Time:** Consider how quickly the controller can respond to temperature changes. Quick response times are essential in dynamic processes where fluctuations can significantly impact product quality.
- **Environmental Considerations:** Take into account the environmental conditions in which the controller will operate. Factors such as temperature extremes, humidity, and exposure to chemicals can influence the choice of controller.
- **Display Type:** Look for digital temperature controllers with clear and intuitive displays that allow easy monitoring of temperature values. Options may include LED, LCD, or touchscreen interfaces.

## **Industrial Applications for Temperature Controllers**

Temperature controllers are indispensable across various industries, ensuring precise temperature regulation in critical processes. Below are some key applications:

### **Laboratories**

In laboratories, maintaining accurate temperature control is crucial for experiments and testing. Temperature controllers help in creating stable environments for chemical reactions, biological research, and material testing. They ensure that temperature-sensitive processes are conducted under optimal conditions, reducing variability and improving the reliability of results.

### **Processing Plants**

Processing plants, particularly those involved in food and chemical production, rely on temperature controllers to regulate processes like fermentation, pasteurisation, and distillation. Accurate temperature control is essential for ensuring product quality, consistency, and safety. By maintaining the correct temperature, these controllers help optimise production efficiency and prevent equipment malfunctions.

### **Research Centres**

Research centres across various scientific disciplines use temperature controllers to support a wide range of studies, from environmental simulations to material science research. These controllers provide the precise temperature regulation needed for accurate data collection and analysis, supporting breakthroughs in technology and science.

### **Packaging Industry**

In the packaging industry, temperature controllers are vital for processes such as sealing, moulding, and material bonding. They ensure that packaging materials are processed at the correct temperature, which is essential for creating strong seals, preventing product contamination, and maintaining package integrity during storage and transport. In food packaging, precise temperature control is crucial to ensure the safety and quality of the packaged products, helping to prevent spoilage and extend shelf life by maintaining the ideal conditions for food preservation.

### **Healthcare**

Temperature controllers are crucial in the healthcare industry, where they’re used in medical devices, sterilisation equipment, and pharmaceutical storage. Maintaining precise temperatures is essential for patient safety, the efficacy of sterilisation processes, and the preservation of sensitive medicines and biological samples.

### **Plastic Industry**

In the plastic industry, temperature controllers are used in injection moulding machines, extruders, and other equipment involved in shaping and forming plastic materials. Precise temperature control ensures the quality of the final product, reduces material waste, and enhances the efficiency of the manufacturing process.

## **Frequently Asked Questions About Temperature Controllers**

### **Is PID a good controller for temperature control?**

Yes, PID temperature controllers are highly effective for temperature control and are often a top choice for sale in applications requiring precise management. They’re designed to continuously calculate the error between the desired and actual temperature, and apply corrective actions to minimise this error. PID controllers offer precise control by adjusting the process in real-time, making them ideal for applications that require stable and accurate temperature maintenance.

### **What are the advantages of a digital temperature controller?**

Digital temperature controllers offer several advantages over their analogue counterparts. They provide higher accuracy and precision in temperature control, thanks to their ability to process complex algorithms. Digital controllers are also programmable, allowing for customised temperature settings and timing intervals, which is particularly useful in applications requiring specific temperature profiles. Additionally, they often come with features such as memory for storing settings, user-friendly interfaces, and the ability to integrate with other digital systems, enhancing overall process control and efficiency.

### **What is the difference between a PID controller and a temperature controller?**

A temperature controller is a general term for any device that regulates temperature, while a PID controller is a specific type of temperature controller. PID controllers use a control loop feedback mechanism (Proportional, Integral, Derivative) to maintain the desired temperature by minimising the error between the setpoint and the actual temperature.

In contrast, basic temperature controllers may use simpler mechanisms, such as on-off control, which only turns the heating or cooling element on or off when a certain threshold is reached. PID controllers offer more precise and stable temperature control compared to basic temperature controllers, often justifying their higher price due to the advanced features and accuracy they provide. This is also the case for digital temperature controllers.

## **Delivery Information**

RS offers fast and reliable delivery services to ensure you receive your temperature controllers and related components like [temperature data recorder](https://my.rs-online.com/web/c/test-measurement/data-acquisition-logging/data-loggers/) and [signal conditioners](https://my.rs-online.com/web/c/relays-signal-conditioning/signal-conditioners-isolators/signal-conditioners/) when you need them. Our efficient delivery options are designed to meet your timelines and keep your projects on schedule. For more detailed information on delivery specifics, please refer to our [Delivery FAQ page](https://my.rs-online.com/web/content/support/all-articles/delivery).



Temperature Controllers

Process Control

Automation & Control Gear

1228569899

1370019343

1492797549

1805640584

1950438482

2911534392

2972144945

3047907070

3089561311

3379516231

3577158573

3702440375

3893962904

3999174723

4084450865

4292484756

595160564

607105215

630592386

1953764780

2854130884

3031041232

3606191116

3694170890

4239710393

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

Eurotherm Temperature Controllers

327 Products showing for Eurotherm Temperature Controllers

Popular Searches

Related links