PR Electronics 5104A, Analogue to Current Signal Conditioner, Analogue

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

PR Electronics 5104A Repeater/ Power Supply

PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.

Features and Benefits

• 1:1 or signal conversion of analog current / voltage signals • 3.75 kV ac galvanic isolation
• Inputs, outputs and supply are floating and galvanically separated
• Output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter
• Low response time
• Universal supply by AC or DC
• Loop supply > 17.1 V
• DIN Rail mounting (vertically or horizontally)

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Number of Channels 1
Supply Voltage 19.2 → 300 V dc, 21.6 → 253 V ac
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Operating Temperature Range -20 → +60 °C
Series 5104A
17 Within 4 working day(s) (Global stock)
15 Within 4 working day(s) (Global stock)
Price Each
MYR 1,780.24
units
Per unit
1 +
MYR1,780.24
Related Products
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...
From Phoneix Contacts, the DIN-Rail mounted PSM-ME-RS232/RS485-P Interface ...
Description:
From Phoneix Contacts, the DIN-Rail mounted PSM-ME-RS232/RS485-P Interface converter is designed to convert RS-232 interface signals bi-directionally to the RS-485 and RS-422 standard. The robust dual-channel converter is a category 3 device designed for installation in zone 2 potentially explosive ...
Can be mounted on DIN rail individually or ...
Description:
Can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. Input, 2 x 24 VDC supplyIntegrated diode decoupling of power suppliesOutput, ...