Martindale VT25 Voltage Indicator & Proving Unit Kit <3.5mA 700V

  • RS Stock No. 897-7131
  • Mfr. Part No. MARVT25/PD
  • Manufacturer Martindale
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

Martindale Voltage Indicator and Proving Unit Kit MARVT25/PD

Before carrying out any maintenance or repairs on electrical equipment it is essential that all the circuitry is isolated and safe to work on. Electricians, engineers, and technicians must be safe in the knowledge that all checks have been made, in accordance with the Electricity at Work Regulations.

The Martindale VT25/PD kit is a CAT IV 600V and 1000v CATIII approved kit that complies with BS EN61243-3. The electrical test kit comprises of the VT/25 voltage indicator and the PD690 proving unit. Supplied in the TC70 combination soft carry case with convenient neck strap, the quality kit ensures your electrical test equipment is always at hand, ready to use.

VT25 Voltage indicator

Compact and lightweight, the Martindale two-pole VT25 voltage indicator is designed for use on AC or DC systems. The voltage indicator uses bright LED’s to clearly display voltages ranging from 12V to 690V. In addition, the voltage tester also can check continuity, phase rotation testing and single-pole voltage detection. With double insulated cable and removable probe caps, the VT25 voltage indicator complies with the health and safety recommendations for safe working. The ideal tool for conducting safe isolation procedures.

A built-in bright white LED torch also provides extra light when used dark or low light conditions.

Features and Benefits

• Ergonomically designed for maximum comfort
• Complies with BS EN61243-3 and GS38
• AC/DC indication from 12 to 690V
• Continuity – Audible buzzer and optical LED
• Single pole phase test 90 to 690V
• Phase rotation test 120 to 400V
• Built-in torch for low light or dark conditions
• Double insulated cable
• IP64 ingress protection
• Auto power off
• Powered by 2 x 1.5v AAA batteries

PD690 Proving Unit

The Martindale PD690 is a proving device rated to 700 Volts. Tough and lightweight, the battery-powered unit enables voltage indicators to be fully checked in compliance with the latest Health and Safety recommendations. The proving unit is compatible with all Martindale voltage indicators including the VI-15000 and VI13800 models. In addition, this device is suitable for proving any two-pole testers with LCD or LED indication, illuminating LED’s up to 690V.

Features and Benefits

• Constructed from high-quality tough materials
• 700V AC
• Long-life battery
• Low Battery indication
• Can be used to check Drummond and other filament test lamps
• Compatible with standard Multimeters
• Supplied with 6 x 1.5V AA alkaline batteries

Applications

Designed to suit a vast array of applications, voltage indicators, and their proving units are used to check electrical equipment is functioning safely and at the levels, they should be. It is vital voltage levels are checked regularly. The test equipment can help engineers identify potential faults and to prepare for any maintenance or repair. Some of the most common areas are

• Electrical contracting
• Power and utility plants
• Industrial engineering
• Electrical Test Equipment

FAQ

Q: Are there any additional accessories or spares available?
A: Yes, RS Components offer the following part numbers;
• 122-6551 for the TC70 Soft Carry Case
757-5084 for the LOKKIT1 Safety Lock Out Kit
865-4731 for the VT25 Voltage Indicator
719-0894 for the PD690 Proving Unit
744-2209 for the 1.5V AAA batteries

Standards

BS EN61243-3:2010 CAT IV 600V, CAT III 1000V

Supplied with

Carry case, neck strap, AAA 1.5 V batteries (x2), instructions

Martindale Lock-Off Kits, Voltage Indicators and Proving Units

Specifications
Attribute Value
Model Number VT25
Test Current Rating <3.5mA
Output Voltage 700V
Kit Contents PD690 Proving Unit, TC55 Carry Case with Neck Strap, VT25 Voltage Indicator
Battery Type 2 x 1.5 V AAA
Power Source Battery
Dimensions 143 x 84 x 50 (Proving Unit) mm, 205 x 67 x 27 (Indicator) mm
Height 27 (Indicator) mm, 50 (Proving Unit) mm
Length 143 (Proving Unit) mm, 205 (Indicator) mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Width 67 (Indicator) mm, 84 (Proving Unit) mm
31 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,044.67
units
Per unit
1 +
MYR1,044.67
Related Products
The PTS Pair Tracing System comprises the PTS ...
Description:
The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs. ...
RS1020 wire tracer is a professional general purpose ...
Description:
RS1020 wire tracer is a professional general purpose cable and wire locator, ideal for tracing cables in walls or underground. This tracer can also be used for locating fuses / breakers on final circuits, locating interruptions, short circuits in cables ...
Troubleshooting test tool kit for finding circuit breakers ...
Description:
Troubleshooting test tool kit for finding circuit breakers and hidden wire problems in electrical wiring installations. Identifies breakers/fuses with CertainCircuit™ detection, finds open and shorts circuits and trace wires behind walls and underground. Tests energized circuits up to 600V AC/DC ...
A fibre optic power meter and light source. ...
Description:
A fibre optic power meter and light source. 850, 1300//1310, 1490 and 1550 wavelength measurement capabilityPower measurement in dBm and mW, loss display in dBAuto Power OffFitted with FC 2.5mm fibre optic socketOperates on standard 3xAAA batteries (not supplied).