John Drummond Voltage Indicator & Proving Unit Kit 3.5mA 700V ac

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

John Drummond Test Lamp & Proving Unit Kit

The John Drummond test lamp and proving unit includes an MTL15 test lamp coupled with a PD690 proving unit and the TC69 combination carry case. Safe electrical work requires the use of a voltage indicator or test lamp that has been proved with a proving device before and after use. This TC69 soft carry case ensures that your proving device is always on hand and provides the simplest solution for implementing safe isolation practices for electrical test equipment. For convenience and to save time, the proving unit can be used without having to remove it from the case. The PD690 voltage and power output are matched to the MTL15 to illuminate all voltage bands and prove the test lamp is functioning correctly. The 1.5V alkaline batteries are required for the power supply to the proving unit.

Features and Benefits

• Four illumination bands up to 690V
• 1000V CAT IV safety rating
• Right angled and straight GS38 compliant probes
• High intensity long life LED indication
• 360° viewing angle


• Wind turbines installations
• Energy intensive process industries
• High power variable speed drives
• UPS systems


• IP64 rated
• BS EN61010

Attribute Value
Test Current Rating 3.5mA
Output Voltage 700V ac
Kit Contents Instructions, 1 L-Shaped Prod and Instructions to GS38, 1 Long Angled Prod, 2 Long Straight Prods, 2 Straight Prods, 6 x 1.5V AA Alkaline Batteries
Display Type LCD
Battery Type Alkaline Battery
Power Source Battery
Dimensions 84 x 143 x 50mm
Weight 400g
Height 50mm
Length 84mm
Maximum Operating Temperature +40°C
Width 143mm
Minimum Operating Temperature -10°C
10 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,337.28
Per unit
1 +
Related Products
The Fluke 345 measures a wide range of ...
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
SMKIT20 contains all the test tools to ensure ...
SMKIT20 contains all the test tools to ensure safe isolation procedures and a wiring check can be implemented before, during and after installation. SMKIT20 Smart Metering Kit with BZ101, TEK101, MTL20, PD440, VT7 and TC70.SMKIT20 includes a Buzz-It check plug ...
Martindale VIPDLOKPRO138 kit contains the VI13800 400 V ...
Martindale VIPDLOKPRO138 kit contains the VI13800 400 V voltage indicator, matching PD440 proving unit and the LOKKITPRO ultimate lock-out kit. The kit ensures that you are never short of the right device to lock-out safely, prove dead and achieve compliance ...
Voltage level indicator & proving unit safety kit ...
Voltage level indicator & proving unit safety kit comprising. Voltage range: 230V and 400V AC/DCConforms to HSE GS38 tip standardsCable: Double insulated silicone 1.4 metresEN61010 CAT IV 600V safety standard=.