Molex 33A-100-10 Video, Data & Voice Wiring Tester of Miswire, Open Circuit, Short Circuit

  • RS Stock No. 215-6391
  • Mfr. Part No. 33A-100-10
  • Manufacturer Molex
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Molex UTP and STP Cable Tester

From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.

The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system

Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox

Features and Benefits

• Built-in modular jacks on both units for testing USOC, 568A and 568B cabling
• Verification of correct wiring sequence
• Pin-point accuracy of cable continuity and sequencing of 1, 2, 3 and 4 pair shielded and unshielded twisted pair cabling
• The LED display provides a clear view and visual indication of mis-wires, shorts, open circuit and reversed wiring
• Manufactured from high-quality impact resistant materials
• A compact and lightweight device
• Master and remote units conveniently snap and lock together when not in use
• Proximity switch disconnects the battery when not in use saving valuable power.
• Requires a 9 volt alkaline battery see part number 826-4435


The Molex 33A-100-10 wiring tester can be used in any applications where UTP and STP cabling is or is going to be installed. Ensuring structured data cables are wired correctly is essential as incorrect wiring can be extremely costly to rectify. Some of the most common applications and environments are

• Data centres
• Schools and colleges
• Factories and warehouses
• Office blocks
• Hospitals and laboratories
• Manufacturing sites

Attribute Value
Cable Type STP, UTP
Test Type Miswire, Open Circuit, Short Circuit
Display Type LED
Power Source Battery
Battery Type 9V
Weight 284g
Width 60mm
Height 144mm
43 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 672.58
Per unit
1 +
Related Products
Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe ...
Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter ...
A series of Fluke MicroScanners with all the ...
A series of Fluke MicroScanners with all the test capability of the MS2-100, but includes all accessories in a single, preconfigured carry case. Being supplied with various products including a RJ11 patch cord and owners CDs, they are perfect for ...
The Fluke MicroScanner2 streamlines voice/data/video cable and service ...
The Fluke MicroScanner2 streamlines voice/data/video cable and service testing. Its Revolutionary user interface makes testing fast, easy, and crystal clear. Various features including available services (10/100/1000 Ethernet, POTS, PoE voltage), cable length, wiremap, cable ID, and distance to fault are ...
For toning and tracing wire on non-active networks ...
For toning and tracing wire on non-active networks and specifically for identifying individual pairs with SmartTone™ technology. Angled bed-of-nails clips allow easy access to individual wires and the RJ11 connector is ideal for use on telephone jacks. The large loudspeaker ...