Monitran Vibration Sensor 8 mA -10°C → +140°C, Dimensions 50 x 19 x 19 mm

  • RS Stock No. 533-2302
  • Mfr. Part No. MTN/1830SM8
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1830SM8 Mini Low Profile with M8 Mount

Used for machine tools and Paper Machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz to 9KHz
Bias voltage nominal 12Vdc
Electrical noise 0.1 mg max
5 meter PTFE Cable - stainless steel over braided
M8 x 25 mm mounting bolt
IP 67 Stainless Steel body Case
Dimensions (LxWxH): 50x19x19mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 8 mA
Minimum Operating Temperature -10°C
Maximum Operating Temperature +140°C
Dimensions 50 x 19 x 19 mm
Temporarily out of stock - back order for despatch 10/01/2020, delivery within 4 working days from despatch date
Price Each
MYR 1,521.36
units
Per unit
1 - 5
MYR1,521.36
6 +
MYR1,475.32
Related Products
The highly versatile AMM20B Series non-contacting multi-turn rotary ...
Description:
The highly versatile AMM20B Series non-contacting multi-turn rotary position sensor has a 12-bit resolution, a rotational life of up to 50 million cycles and a factory programmable electrical angle from 1080 to 3600 degrees. Designed to meet the specifications of ...
Magnetostrictive contactless linear travel sensorAbsolute measurements with analogue ...
Description:
Magnetostrictive contactless linear travel sensorAbsolute measurements with analogue outputPosition output signal can be inverse and directContactless reading, meaning no wear and a long service lifeOutstanding linearity and repeatabilityHigh protection rating for use in especially harsh conditionsHighly ...
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
The TE Connectivity MEAS MiniSense 100 series are ...
Description:
The TE Connectivity MEAS MiniSense 100 series are economical, cantilever-type vibration sensors. Loaded by a mass, these sensors feature a high level of sensitivity at low frequencies and can be used in applications that detect impact or continuous vibration. Constructed ...