Microchip Technology USB3300-EZK-TR, USB Transceiver 3-Port, 3.3 V, 32-Pin QFN

  • RS Stock No. 177-9859
  • Mfr. Part No. USB3300-EZK-TR
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY. This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time.

USB-IF Hi-Speed
Latch-Up performance exceeds 150 mA
ESD protection levels of ±8kV HBM without external protection devices
Includes full support for the optional On-The-Go (OTG) protocol
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply

Specifications
Attribute Value
Number of Transceivers 3
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 32
Dimensions 5.1 x 5.1 x 0.95mm
Height 0.95mm
Length 5.1mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 5.1mm
4150 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 10)
MYR 5.11
units
Per unit
Per Pack*
10 - 40
MYR5.11
MYR51.10
50 - 90
MYR4.526
MYR45.26
100 +
MYR3.90
MYR39.00
*price indicative
Packaging Options:
Related Products
ROHM's high efficiency step-down switching regulator BD9132MUV is ...
Description:
ROHM's high efficiency step-down switching regulator BD9132MUV is a power supply designed to produce a low voltage including 0.8 volts from 5.5 / 3.3 volts power supply line. Offers high efficiency with our original pulse skip control technology and synchronous ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
WIZnet's range of Embedded Ethernet controller Chips, which ...
Description:
WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:. RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL interface is supported to connect ...
The 9S12G is an optimized, automotive, 16-bit microcontroller ...
Description:
The 9S12G is an optimized, automotive, 16-bit microcontroller family focused on low-cost, high-performance and low pin-count. The 9S12G is suited for general purpose automotive applications requiring CAN or LIN/SAE J2602 communication.