FTDI Chip FT232RQ-REEL USB to Serial UART RS232, RS422, RS485 UART 3MBd, 5 V, 32-Pin, QFN

  • RS Stock No. 170-9073
  • Mfr. Part No. FT232RQ-REEL
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): ID
Product Details

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput

Applications

USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Specifications
Attribute Value
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485 UART
Transmit FIFO 256B
Receive FIFO 128B
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type QFN
Pin Count 32
Typical Operating Supply Voltage 5 V
Dimensions 5 x 5mm
Length 5mm
Width 5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
12000 Within 4 working day(s) (Global stock)
211 Within 6 working day(s) (Global stock)
Price Each (On a Reel of 6000)
MYR 13.216
units
Per unit
Per Reel*
6000 +
MYR13.216
MYR79,296.00
*price indicative
Related Products
The S3510BMU33 Black USB 3.0 Hard Drive Enclosure ...
Description:
The S3510BMU33 Black USB 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with ...
The USB-UART Additional Board features an FTDI chip ...
Description:
The USB-UART Additional Board features an FTDI chip enabling a USB connection to be made to a microcontroller with only a serial UART port available. FTDI FT232RL USB interface chipUSB Mini-B connectorHeader for UART connectionSelectable 3.3V or 5V logic levelsPower ...
The OEM-MICODE Reader Boards are complete Read/Write system ...
Description:
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, ...
Exar offer a variety of UARTs (Universal Asynchronous ...
Description:
Exar offer a variety of UARTs (Universal Asynchronous Receiver Transmitter) with a broad range of first in, first out (FIFO) depths, while supporting popular central processing unit (CPU) bus interface such as 8-bit VLIO.