Stud type track roller OD 62mm Sealed Pa

  • RS Stock No. 194-7197
  • Mfr. Part No. KR62-X-PP-A
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Yoke and stud type roller bearing track rollers: Are ready-to-fit needle or cylindrical roller bearings of single or double row designAre mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers)Have particularly thick-walled outer rings with a crowned outside surfaceCan support high radial loadsTolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impactsAre available with or without an inner ring (yoke type track rollers)Are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance)Are open or sealed on both sidesAre not mounted in a housing bore, but are supported on a flat mating trackCan be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction

Specifications
Attribute Value
Type Stud
Roller Diameter 62mm
Roller Length 80mm
Static Load Rating 48000N
Dynamic Load Rating 26000N
Ring Slide & Track System Bearing Type Eccentric
Bore Size 24mm
Material Steel
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 805.74
units
Per unit
1 - 4
MYR805.74
5 - 9
MYR783.18
10 +
MYR771.76