- RS Stock No.:
- 178-5022
- Manufacturer:
- RS PRO
- RS Stock No.:
- 178-5022
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
An 11 pin plug in DPCO asymmetrical cyclic timer. A selector switch is provided to select eight different time ranges from 1 sec to 100 days independently on both T1 & T2, fine time selection on a selected range is then achieved via the two percentage potentiometers. A green supply on LED is featured along with a red LED to indicate relay output status. All pin details and the function information is clearly marked on the sides of the housing. Pause first - The timing is initiated by supply on pins 2 & 10. Timing commences to energise relay contacts and then times to de-energise relay contacts. This cycle continues so long as the supply is connected. The time period on both energisation and de-energisation (T1 & T2) are independently selectable. If the supply is removed at any point within the cycle any remaining time will be cancelled and if the relay contacts are energised they will de-energise. Pulse first - Exactly the same as above, but a volt free link needs to be fitted externally across pins 2 & 5. On the connection of the supply to pins 2 & 10 the relay contacts immediately energise and then time to de-energise.
Specifications
Attribute | Value |
---|---|
Supply Voltage | 12 → 240V ac/dc |
Mounting Type | Plug In |
Mode of Operation | Pause First, Pulse First |
Time Range | 0.1 s → 10days |
Number of Timer Functions | Dual Function |
Contact Configuration | DPDT |
Time Increment | Days, Hours, Minutes, Seconds |
Maximum Current | 8A |
Maximum Voltage | 250V |
Terminal Type | 11-Pin Connector |
Switch Configuration | DPDT |
Width | 24mm |
Power Supply | External |
Minimum Voltage | 12V ac/dc |
Maximum Operating Temperature | +65°C |
Depth | 74mm |
Length | 48mm |
Minimum Operating Temperature | -20°C |
Time Delay | 100ms |