United Automation, DMFC12 415VAC, Thyristor Trigger Module, 24V ac, 4 → 400Hz, 11-Pin, 122 x 70 x 56mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Dual Mode Firing Circuit, DMFC12

The DMFC12 is a single phase or phase-to-phase trigger module with the option of Phase Angle or Burst Fire Control, or a combination of the two i.e. start up in phase angle and then continue in burst firing.

Standard Din Rail mount
Phase Angle and Burst Fire Control, or Combination of both
Soft-Start 0-30 seconds adjustable
Current limit (using external CT/Hall-effect device)
Enable input (volt-free)
0-5V/0-10V, 0-20mA/4-20mA or potentiometer input signal
24Vdc or 18-24Vac supply
Output power span and zero adjustment

The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.

Specifications
Attribute Value
Input Voltage DC 24V dc
Input Voltage AC 24V ac
Mounting Type DIN Rail
Pin Count 11
Dimensions 122 x 70 x 56mm
Length 122mm
Height 56mm
Maximum Input Logic Voltage 8V
Width 70mm
Maximum Operating Frequency 400 Hz
Maximum Operating Temperature +70 °C
Minimum Operating Frequency 4Hz
Stock check temporarily unavailable - call for stock availability
Price Each
MYR 466.92
units
Per unit
1 - 9
MYR466.92
10 - 49
MYR451.58
50 - 99
MYR441.93
100 - 249
MYR437.61
250 +
MYR433.31
Related Products
The ISL8216MEVAL1Z Evaluation Board is simple, high voltage, ...
Description:
The ISL8216MEVAL1Z Evaluation Board is simple, high voltage, up to 4 A, DC/DC Power Module, that is easy to use. Based on the ISL8216M, it is ideal for power distribution converters/point-of-load (POL) applications for servers, 48 V telecommunications/datacom, 12 V/24 ...
Excellent unidirectional switches for phase control applications such ...
Description:
Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Solid state switches used to control the flow of electrical ...
Excellent unidirectional switches for phase control applications such ...
Description:
Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Solid state switches used to control the flow of electrical ...
Excellent uni-directional switches for phase control applications such ...
Description:
Excellent uni-directional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamperes of current. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. ...