Dormer Threading Tap, M12 Thread, 1.75mm Pitch, Metric Standard, Machine Tap
- RS Stock No.:
- 300-0003
- Mfr. Part No.:
- E501-M12
- Manufacturer:
- Dormer
1 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ
Added
Price Each
MYR364.34
| Units | Per Unit |
| 1 + | MYR364.34 |
- RS Stock No.:
- 300-0003
- Mfr. Part No.:
- E501-M12
- Manufacturer:
- Dormer
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- SE
Product Details
Straight flute left-hand cut HSS machine tap bits E501
Range of HSS machine tap bits, straight flute, left-hand cut with metric pitch.
6H tolerance class, a short, 2-thread input and a 7 ° cutting angle.
Recommended for use in both through or blind holes and for depths up to 2times diameter.
Surface treatment: shiny.
6H tolerance class, a short, 2-thread input and a 7 ° cutting angle.
Recommended for use in both through or blind holes and for depths up to 2times diameter.
Surface treatment: shiny.
Standard: ISO 529
Rolled Flute Taps
Bright finish fluteless taps; for use on copper, aluminium, magnesium, brass, zinc etc.
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Flash chrome finish fluteless taps; for use on steel up to 850N/mm2 tensile strength, free matching and austenitic stainless steel
Made to ISO529 standard for tapping blind and through holes in a wide range of ductile materials
Smooth non-cutting action produces greater thread formed strength, higher life expectancy and increased tapping speeds especially where excessive tension occurs
Specifications
Attribute | Value |
|---|---|
| Thread Size | M12 |
| Set Type | Threading Tap |
| Type | Straight Flute |
| Pitch | 1.75mm |
| Thread Standard | Metric |
| Thread Direction | Left Hand |
| Number of Pieces | 1 |
| Overall Length | 89 mm |
| Hand/Machine Tap | Machine Tap |
| Material | HSS |
| Shank Diameter | 9 mm |
| Class of Fit | 6H |