RSCAL(1770539)NO-GO RING GAUGE M5

  • RS Stock No. 189-3350
  • Mfr. Part No. 16335 +Cal
  • Manufacturer Volkel
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

The thread NO-GO ring gauge must not screw into the part by hand more than two threads (without using excessive force). If the ring gauge can be screwed into the thread by more than two threads, the thread does not meet the desired requirements (=scrap). The no-go thread gauges are marked in red. The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL using IAC thread scanners.

Specifications
Attribute Value
Plug/Ring Ring
Gauge Type No Go Ring
Thread Size M5 x 0.8
Pitch Diameter 0.8mm
Tolerance 6g
Imperial or Metric Metric
Temporarily out of stock - back order for despatch 09/03/2020, delivery within 4 working days from despatch date
Price Each
MYR 433.30
units
Per unit
1 +
MYR433.30
Related Products
The Volkel Go ring gauge M2x0.5 is calibrated ...
Description:
The Volkel Go ring gauge M2x0.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go ring gauge M10x1.5 is calibrated ...
Description:
The Volkel Go ring gauge M10x1.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...
The Volkel Go No-Go Plug Gauge M5x0.8 is ...
Description:
The Volkel Go No-Go Plug Gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go ring gauge M6x1 is calibrated ...
Description:
The Volkel Go ring gauge M6x1 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges ...