Murata Power Solutions Non-Isolated DC-DC Converter, 12V dc Input, 5V dc Output, 1.5A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications

• UL certified

Specifications
Attribute Value
Input Voltage 12V dc
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
MTBF 78700000h
Load Regulation ±0.4
Line Regulation ±0.25%
Ripple And Noise 40mV Pk-Pk
Allowed Circuit Configurations Parallel
Maximum Input Current 690mA
Protection Features Short Circuit Protection
Depth 16.5mm
Series OKI-78SR
Rated Output Power 7.5W
Switching Frequency Range 500kHz
Width 8.6mm
Power Signal Conversion Type DC-DC
Weight 2g
Length 10.4
2160 In Global stock for delivery within 4 - 6 working days
Price Each (On a Reel of 360)
MYR 19.643
units
Per unit
Per Reel*
360 - 360
MYR19.643
MYR7,071.48
720 - 720
MYR18.707
MYR6,734.52
1080 +
MYR16.369
MYR5,892.84
*price indicative
Related Products
The Murata Power Solutions NMG series of DC/DC ...
Description:
The Murata Power Solutions NMG series of DC/DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails ...
The Murata CME series of DC-DC converters are ...
Description:
The Murata CME series of DC-DC converters are cost effective and come in industry standard packages with industry standard pin-out. The galvanic isolation of these DC-DC converters allows the device to be configured to provide an isolated negative rail in ...
The Traco Power TEM 3N series is a ...
Description:
The Traco Power TEM 3N series is a range of isolated DC/DC converters in a DIP-24 package.The offer tight output regulation and very low output noise. The TEM 3N series provides a cost effective solution for many industrial or consumer ...
The A Series power isolated DC to high ...
Description:
The A Series power isolated DC to high voltage DC converters are ultra miniature. These converters are ideal for applications where minimal size and weight are required. Input/Output proportionalQuasi-sinewave OscillatorControl PinCurrent - Low leakageLow Output/Input CapacitanceGalvanic Input to Output isolation1 ...