Roxburgh EMC 320 V ac, 420 V ac 100kA DVSB Type 1 Arrester, Type 2 Arrester, DIN Rail Mounting

  • RS Stock No. 707-9810
  • Mfr. Part No. DVSB4001004TNS
  • Manufacturer Roxburgh EMC
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MOV Module, Roxborough EMC DVSB

Dual high-energy electrically isolated metal oxide varistors
Single and 3 phase line protection from surges and lightning
Modular design to snap-fit directly onto top hat profile DIN rails
Remote operation contacts for protection indication

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Attribute Value
Suppressor Type Type 1 Arrester, Type 2 Arrester
Maximum Voltage Rating 320 V ac, 420 V ac
Mounting Type DIN Rail
Maximum Surge Current 100kA
Series DVSB
Length 72mm
Depth 70mm
Height 90mm
Dimensions 72 x 70 x 90mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 5,035.78
Per unit
1 - 4
5 - 9
10 - 24
25 - 49
50 +
Related Products
STP T12 12.5 is the series of combined ...
STP T12 12.5 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
STP T2 40 is the series of Type ...
STP T2 40 is the series of Type 2/Class II devices for discharging voltage surges. Suitable for the second stage of protection in supply distribution panels in which Type 1 protection devices are installed upstream, or for the first stage ...
STM T23 20 S is the series of ...
STM T23 20 S is the series of combined Type 2+3/Class II+III devices for discharging voltage surges while providing a very fine voltage protection level. Suitable as the final stage of protection in panels with Type 2 protection devices installed ...
POP CT is the series of combined power ...
POP CT is the series of combined power frequency overvoltage protection (POP) and surge protection device for discharging surge current in the first step of protection. Intended for actuation on the contactor of an installation (not included). Suitable for the ...