ABB 16.7 V 20kA OVR, DIN Rail Mounting

  • RS Stock No. 175-2604
  • Mfr. Part No. OVR SL15
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ABB Surge Suppressor Unit

The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It is a combined category D, C, B tested protector suitable for twisted pair signalling applications, which require either a lower in-line resistance, increased current and/or higher bandwidth. Also, suitable for DC power applications less than 0.75Amps. For use at boundaries up to LPZ 0 to protect against flashover (typically the service entrance location) through to LPZ 3 to protect sensitive electronic equipment. It has an electrical rating of 16.7V and 20kA.

Features and Benefits

DIN rail mount High (750mA) maximum running current High bandwidth enables higher frequency (high traffic or bit rate) data communication Operating temperature ranges between -40°C and 80°C Repeated protection in lightning intense environments Screen terminal enables easy connection of cable screen to earth Strong, flame retardant, polycarbonate housing Ultra-slim product of 7 mm width Very low let-through voltage between all lines - Full mode protection

Applications

High-speed digital communication equipment Process control Systems with long signal lines

Certifications

IEC 61643-21 UL-94 approved

Specifications
Attribute Value
Maximum Voltage Rating 16.7 V
Mounting Type DIN Rail
Maximum Surge Current 20kA
Series OVR
Length 106.5mm
Depth 7mm
Height 104.6mm
Dimensions 106.5 x 7 x 104.6mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 951.88
units
Per unit
1 - 1
MYR951.88
2 - 4
MYR858.26
5 +
MYR780.24
Related Products
STP T23 20 is the series of combined ...
Description:
STP T23 20 is the series of combined Type 2+3/Class II+III devices for discharging voltage surges while providing a very fine voltage protection level. Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream ...
Type 2/3 surge protection, consisting of protective plug ...
Description:
Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
Low-resistance enhanced surge protector suitable for twisted pair ...
Description:
Low-resistance enhanced surge protector suitable for twisted pair signalling applications. Low let-through voltage between all linesVery low (1Ω) in-line resistanceHigh (1.25A) maximum running currentWide bandwidthSturdy, flame retardant, ABS housingRemovable DIN rail foot for easy installation. Product can also ...