Reliance Water Controls Stainless Steel Stopcock, 1/2in

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Maximum temperature: 99゚C
Minimum temperature: -10゚C
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter

Approvals

WRAS Approved

Expansion Vessels

Specifications
Attribute Value
Connection 1 1/2 in BSP Male
Body Material Stainless Steel
For Use With Cold Water, Hot Water
Operating Pressure 5bar
Connection Gender 1 Male
Pipe Size 1 1/2in
Operating Temperature Range -10 → +99 °C
4 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 241.51
units
Per unit
1 - 9
MYR241.51
10 +
MYR229.41
Related Products
RS Pro Stainless Steel L and T Port ...
Description:
RS Pro Stainless Steel L and T Port Ball Valves used for controlling flow and are excellent choice for shut-off applications. These ball valves are durable and perform well even after long periods of time. Available in a variety of ...
RS Brand reduced-bore quarter-turn stainless steel ball valves ...
Description:
RS Brand reduced-bore quarter-turn stainless steel ball valves for the control of flow. Available in a variety of sizes. Reduced port, 1/4" - 3" (DN8 - DN80)W.P: 1000WOG (PN63)W.T: -20°C to 200°C (-4°F to 392°F)Investment castingBlow-out proof stemAnti-static device (option)Locking ...
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment castingBlow-out proof stemLocking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ISO7/1 and ...
RS Stainless Steel Screwed End Ball Valves for ...
Description:
RS Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" - 3" (DN8 - DN80)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceTapped and drilled mounting pad (option)TA-Luft approved (option)Length conform to DIN ...